Processing » Extruders » Single Screw Extruders » New Jersey

Building Filters

16

Used Single Screw Extruders in New Jersey, USA

  • Trusted Seller
    KILLION KL-150

    KILLION KL-150

    • Manufacturer: KILLION

    Used 1.5” Killion Single-Screw Extruder Model: KL-150

    Hainesport, NJ
  • Trusted Seller
    2003 CW BRABENDER INTELLI-TORQUE IT

    2003 CW BRABENDER INTELLI-TORQUE IT 7150

    • Manufacturer: Brabender

    Used C.W. Brabender Intelli-Torque IT-7150 Plasticorder Extruder System, Serial #E03-146. Currently equipped with a 24:1 L/D extruder barrel and ¾" (19 mm) screw with strand die, along with a water-cooled feed th...

    Hainesport, NJ
  • Trusted Seller
    DAVIS STANDARD 150INDS-20

    DAVIS STANDARD 150INDS-20

    • Manufacturer: Davis-Standard

    Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...

    Hainesport, NJ
  • Trusted Seller
    Gloucester 60mm

    Gloucester 60mm

    • Manufacturer: Gloucester

    Used 2.36” (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45” centerline height. Includes temperature ...

    Hainesport, NJ
  • Trusted Seller
    5" readco single screw extruder

    5" readco single screw extruder

    • Manufacturer: Readco

    2005 Readco S/S Extruder, Machine 5 Inch C.P., S/N 108530, with Some S/S Spare Parts, Includes (2) S/S Augers, (2) S/S Heads with Portable Cart, with Reliance 30 hp Motor, 230/460 Volts, 3 Phase, with S/S Platfor...

    Red Bank, NJ
  • Trusted Seller
    2 " randcastle single screw

    2 " randcastle single screw extruder

    • Manufacturer: Randcastle

    Used 2" O.D. x 8" Wide Randcastle Sheet Extrusion 3-Roll Stack including Pull Roll Station and Single Position Winder.

    Red Bank, NJ
  • Trusted Seller
    23500 lbs/hr berstorff single screw

    23500 lbs/hr berstorff single screw extruder

    • Manufacturer: Berstorff

    RESIGUES EXTRUDER, 12/1 TOTAL FLIGHT LENGTH. 23,500 LBS/HR. CARBON STEEL 1000 PSIG DESIGN PRESSURE @ 698 DEG. F. DESIGN TEMPERATURE. 7'0" LONG X 6" WIDE X 7'0" HIGH. MATERIAL BEING EXTRUDED-MOLTEN POILYMER CONTAI...

    Red Bank, NJ
  • Trusted Seller
    Processing Technologies International LLC G6500

    Processing Technologies International LLC G6500

    • Manufacturer: International

    Used 6.5" Dia Single Screw Extruder. Manufactured by Processing Technologies International LLC. Model G6500. Trident Series. L/D ratio 32:1. Gear Drive Info: PTI Model ZPE2-360-B B7 S/N 15258, Ratio: 12.50:1. Dri...

    Red Bank, NJ
  • Trusted Seller
    54 " battenfeld gloucester co-extrusion

    54 " battenfeld gloucester co-extrusion sheet extrusion line

    • Manufacturer: Battenfeld
    • Model: Gloucester

    Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. Line consists of the following: -(3) Acrison volumetric feeders wit...

    Red Bank, NJ
  • Trusted Seller
    Killion KL-150

    Killion KL-150

    • Manufacturer: Killion

    Used 1.5” 24:1 L/D Single-Screw Extruder. Manufactured by Killion. Model KL-150. Includes: (3) control panels, Zenith melt pump with 2 hp motor. Model PEP-10 rated at 3.4-68 lbs/hr spare grooved feed throat, an...

    Red Bank, NJ
  • Trusted Seller
    Gloucester Vented

    Gloucester Vented

    • Manufacturer: Gloucester

    Used 2.36” 32:1 L/D Vented Single-Screw Extruder. Manufactured by Gloucester. Barrel: 45” centerline height. Driven by a 50 hp DC motor and SCR control. Gearbox: 9.48:1 ratio, serial 140. Top center feed throat,...

    Red Bank, NJ
  • Trusted Seller
    Processing Technologies International LLC G3500

    Processing Technologies International LLC G3500

    • Manufacturer: International

    Used 3.5"Dia Single Screw Extruder. Made by Processing Technologies International LLC. Model G3500. Trident Series. L/D ratio 32:1. Gear Drive: PTI Model ZPE2-225-B B7. Serial #L43058. Ratio 12.59:1. Driver:1800...

    Red Bank, NJ
  • Trusted Seller
    Processing Technologies International LLC G5000

    Processing Technologies International LLC G5000

    • Manufacturer: International

    Used 5" Dia Single Screw Extruder. Built by Processing Technologies International LLC. Model G5000. Trident series. L/D ratio 32:1. Gear Drive: PTI Model ZPE2-300-B B7. Serial #15253. Ratio 12.66:1. Driver:1800. ...

    Red Bank, NJ
  • Trusted Seller
    Beringer 1228-M-315

    Beringer 1228-M-315

    • Manufacturer: Beringer

    Used 3.5" Beringer Slide Plate Screen Changer. Model #1228-M-315, serial #R31006. Includes hydraulic pumping system. Screen changer mounted on stand supplying approximately 42" discharge height. Max operating pre...

    Red Bank, NJ
  • Trusted Seller
    1999 BUSS MDS200-4

    1999 BUSS MDS200-4

    • Manufacturer: Buss
    • Model: MDS200-4

    Used 8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Model: MDS200-4 Year: 1999 Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm

    Hainesport, NJ
12

Overview

Single screw extruders are industrial machines used to process and shape plastic materials by forcing them through a shaped die. They are widely used in the plastic manufacturing industry for producing pipes, sheets, films, and other plastic products. These machines are known for their efficiency and ability to handle a variety of plastic types.

FAQ

What should I consider when buying a used single screw extruder?

Consider the machine's age, condition, screw diameter, and length-to-diameter ratio. Check for maintenance records and ensure the extruder has been well-maintained and properly serviced.

How do I ensure the single screw extruder is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Ensure the extruder is properly secured and protected during transit, and verify all necessary parts are included.

What is the maintenance schedule for a single screw extruder?

Regular maintenance includes checking and replacing worn screws and barrels, inspecting heating and cooling systems, and ensuring proper lubrication of moving parts. Consult the manufacturer’s manual for detailed maintenance intervals and procedures.