Used waveforms in Ireland

EMC Partner TRA2000IN6

• Manufacturer: EMC

Details The EMC Partner TRA2000IN6 Transient Test System offers all the features of the TRA2000 and the TRA2000IN4, with the addition of ability to perform CWG 1.2/50 µ s open circuit and 8/20 s short circuit and...

EMC Partner TRA2000

• Manufacturer: EMC

Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...

NoiseKen ESS-2000

• Manufacturer: NoiseKen

Details Output waveforms prescribed by IEC 61000-4-2 are available. In addition, various waveforms can be generated by changing the discharge capacitor and discharge resistor. Since the charge/discharge capacitor...

Anritsu MA2472A

• Manufacturer: Anritsu

Details The Anritsu MA2472A is a used RF Power Sensor operating from 10 MHz to 18 GHz with a measurement range of -70 to +20 dBm. It employs diode detectors for precise waveform analysis and includes a matching c...

Anritsu MA2442B

• Manufacturer: Anritsu

Details The Anritsu MA2442B is a used 18 GHz RF Watt Sensor designed for high-precision broadband microwave measurements. It uses diode detectors for accurate power readings of multi-tone and modulated RF wavefor...

EMC Partner AVI3000

• Manufacturer: EMC

Details EMC Partner AVI3000 (call to schedule availability)The EMC PARTNER AVI3000 Indirect Lighting Generator is a state of the art test system for DO-160 section 22 and MIL-STD-461 CS117. Full compliance up to ...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Anritsu ML2496A

• Manufacturer: Anritsu
• Model: ML2496A

Details The Anritsu ML2496A is a dual-channel power meter featuring 20 MHz video bandwidth, high dynamic range for CW and pulsed signals, and advanced time-gated and triggered measurement capabilities, complete w...

emtest VDS200N

• Manufacturer: emtest

Details emtest VDS200N (contact Axiom for availability) The emtest VDS200N Voltage Drop Simulator is used to simulate the various battery supply waveforms recommended by international standards and by car manufac...

Solar 7399-3

Details The Solar 7399-3 Transient Generator delivers precise surge and transient waveforms for EMC compliance testing. Engineered to evaluate electronic equipment immunity against voltage spikes, it ensures cons...

Teseq (Schaffner) NSG 5600

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 5600 is a precision EMC tester that generates synchronized, multi-channel automotive-specific waveforms including voltage dropouts, sinusoidal bursts, dips, ISO/SAE pulses, and mag...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Anritsu MA2472D

• Manufacturer: Anritsu

Details The Anritsu MA2472D is an advanced diode power sensor operating from 10 MHz to 18 GHz, delivering a wide ~90 dB dynamic range (–70 dBm to +20 dBm). It features low-latency diode sensing, internal EEPROM c...

Haefely PSURGE 8000

• Manufacturer: Haefely

Details The Haefely PSURGE 8000 is a surge generator designed for telecom and industrial testing, supporting IEC, ANSI, and ITU-T standards. It delivers a wide range of surge waveforms to replicate real-world ele...

Fluke PROSIM 8

• Manufacturer: Fluke

Details Fluke PROSIM 8 Vital Signs Simulator The Fluke PROSIM 8 Vital Signs Simulator offers fast and comprehensive preventative maintenance (PM) testing for your entire patient monitor fleet. This 8-in-1 mul...