Used Dryers in New Jersey, USA

Carbon Steel Pfaudler Dryer-Twin Shell & Double Cone - IPP# 45084

• Manufacturer: Pfaudler

tumble dryer Roller bearings Motor driven through roller chain drive Reeves 1/2 HP, 208/220/440 volt drive, 15 to 152 rpm Ceramic vac arm w/mech seal

Stainless Steel 304 VOMM Turbotechnologia Dryer- Ribbon & Paddle - IPP# 229479

• Manufacturer: VOMM Turbotechnologia

jacketed 'Turbo' continuous paddle dryer CE 600mm inside diameter x 3820mm straight side, bolt flat ends 3 x 304 stainless steel (1.4307) jacket sections on straight side only each jacket is 711mm outside diamete...

Stainless Steel 316 JH Day Dryer- Nauta / Conical - IPP# 106168

• Manufacturer: Nauta

1.7 cubic foot working capacity mini-mixer dryer Polished inside and out U-stamp 30" diameter Single screw design Arm rotates 2-4 rpm, a 6" diameter screw rotates 60 to 120 rpm 230/460 volt bottom with safety gri...

Stainless Steel 316 Rosenmund AG Dryer-Rotary Vacuum - IPP# 233653

• Manufacturer: Rosenmund

Jacketed rotary vacuum batch paddle dryer with static chopper blades Patent and designed by List DTB manufacturing #3000.01.01.01.3000, working pressure internal -1/6 bar @ 260 degrees C (11000 liter), jacket 6 b...

Dryer-Rotary Vacuum 10 m3 (353.1 ft3) Titanium - IPP# 229015

• Manufacturer: List (Switzerland)

vacuum paddle dryer with dust filter and heated shaft Order number: 14.-235/24158/00000/2-2871/53 Internal pressure rating -1/+0,5 bar @ 151 degrees C operating temperature (total volume 11.000 liter) straight si...

Stainless Steel 304 Dryer-Twin Shell & Double Cone - IPP# 210238

doors for a PK dryer. 21" diameter by 1/8" thick, 2 have clamps. Each door has a five inch opening and a 1.25" sanitary connection. Three doors are available.

Dryer-Rotary Vacuum 3 m3 (105.9 ft3) Inconel - IPP# 233655

• Manufacturer: Buss AG

jacketed rotary vacuum paddle dryer TUV certified design pressure vessel -1/1 bar @ -20/200 degrees C (3193 liter), jacket 6 bar @ -20/200 degrees C (151.5 liter), paddle 6 bar @ -20/200 degrees C (208 liter) a r...

Stainless Steel 304 Strong Scott Dryer- Ribbon & Paddle - IPP# 39460

• Manufacturer: Strong Scott

24" diameter x 15' long jacketed Solidaire dryer Rotor has adjustable pitch paddles and was Openings: top 1-6" feed end, 1-6" and 1-6" discharge

Dryer-Spray 7,000 mm (275.6 in) Stainless Steel 304 - IPP# 220469

• Manufacturer: Niro

nozzle type spray dryer system with integrated fluid bed, directly heated with heat recovering, 45% DS feed, product is a micro Granulate, spray nozzle feed (unavailable)dryer directly heated by gas burner, botto...

Stainless Steel 304 NEU Engineering Dryer-Fluid Bed - IPP# 705589

• Manufacturer: NEU Engineering

static fluid bed dryer system reference number K5/8-88-001A Bed temperature 100 - 120 degrees C Bed with (2) pneumatic operated hinged weir plates weir height range 140mm - 250mm Dryer chamber approx. 920mm wide ...

Dryer-Drum 304.8 mm (12 in) Stainless Steel 316 - IPP# 102517

• Manufacturer: Buflovak/Blaw Knox

single drum dip feed dryer Drum cored for steam heating Manual knife discharge Has 15" x 19" CS jkt feed pan 3/60/230/460 volt, rated 44 rpm max, 8.8 rpm min

Stainless Steel 316 Dryer-Twin Shell & Double Cone - IPP# 202093

• Manufacturer: Patterson Kelly

vacuum tumble dryer system. Designed for 50 Lbs/ cubic foot density. Dryer driven by 10 HP 3/60/460V XP motor with Reeves variable speed drive. With (2) 18" diameter charge ports, 1-18" diameter discharge port wi...

Dryer-Wyssmont 2,130 mm (83.9 in) Stainless Steel 304 - IPP# 89433

• Manufacturer: Wyssmont

plate dryer system plate area 73.1 square meter (29) 1750/1930mm diameter 304 stainless steel plates Drying chamber 2130mm x 3135mm x 4812mm high (3) air heaters, manufactured by GEA

Dryer-Wyssmont 63,500 mm (2,500 in) Stainless Steel 316L - IPP# 703106

• Manufacturer: Wyssmont

316L stainless steel (1.4571/1.4435) continuous vacuum plate dryer, 27.5 square meter heat surface area, manufactured by Krauss Maffei, fabrik #3608, KM order #365297/2/001, vessel 20 mbar @ 95 degrees C (11820 l...

Dryer-Spray 3,400 mm (133.9 in) Stainless Steel 304 - IPP# 207375

• Manufacturer: Niro

multifunctional spray dryer system, with nozzle type atomization, and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone ...