Used Dozers in North Carolina, USA

2017 DEERE 650K LGP
- Manufacturer: John Deere
- Model: 650K
- Horsepower: 104 horsepower
- Hours: 2,004 hour
Enclosed cab with heat and A/C, 24” Pads, 10’4 blade with good cutting edge, all pins and bushings are tight and leak free, this dozer starts easy and burns clean with no codes, paint and metal all like new and v...
$119,500 USD
South Mills, NC
2016 CATERPILLAR D6K2 LGP
- Manufacturer: Caterpillar
- Model: D6K2 LGP
- Horsepower: 130 horsepower
- Hours: 5,137 hour
Enclosed cab with heat and cold air conditioning. 80% undercarriage remaining with 30” wide pads. Wired for gps grade system. Limb risers, rear and side screens. Ripper valve. Original factory paint with no damag...
$99,500 USD
South Mills, NC
1987 CATERPILLAR D6H
- Manufacturer: Caterpillar
- Model: D6H
- Horsepower: 165 horsepower
- Hours: 13,613 hour
Open canopy, angle blade with twin hydraulic tilt and full root rake. The pre-emission (NO DEF) diesel engine starts easily and burns clean after 60 seconds of warmup.. 24” wide pads on a 40% remaining UC.
$32,500 USD
South Mills, NC
1998 DEERE 750C LGP
- Manufacturer: John Deere
- Model: 750C LGP
- Horsepower: 140 horsepower
- Hours: 6,830 hour
Open canopy, tight all hydraulic 6-way blade, new rails, sprockets, and top rollers with 34” wide pads. Limb risers and rear screen. The pre-emission (NO DEF) John Deere diesel engine starts easily and burns clea...
$27,500 USD
South Mills, NC
2012 CASE 850L
- Manufacturer: Case CE
- Model: 850 L
- Horsepower: 96.6 horsepower
- Hours: 4,195 hour
Enclosed cab with heat and cold air conditioning. 188” wide 6-way blade with good moldboard and good cutting edges. 24” wide pads on a 50% plus remaining undercarriage. Original factory paint with no damage. The ...
$56,500 USD
South Mills, NC
2019 CATERPILLAR D6 LGP
- Manufacturer: Caterpillar
- Model: D6 LGP
- Horsepower: 215 horsepower
- Hours: 8,903 hour
Cat D6N LGP with 6-way blade, Grade control, GPS ready, will include a complete new undercarriage (not shown in current pictures). very straight sheet metal, cold a/c, tight blade and steering cylinders, ripper v...
$119,500 USD
South Mills, NC
2016 CATERPILLAR D5K2 LGP
- Manufacturer: Caterpillar
- Model: D5K
- Horsepower: 96 horsepower
- Hours: 5,846 hour
Enclosed cab with heat and cold air conditioning. 26” wide pads on a 60% + remaining System One undercarriage. The engine starts easily and burns clean exhaust. Tight blade with good moldboard. Limb risers, rear ...
$79,500 USD
South Mills, NC
2014 CATERPILLAR D6K2 LGP
- Manufacturer: Caterpillar
- Model: D6K2 LGP
- Horsepower: 130 horsepower
- Hours: 7,238 hour
Enclosed cab with heat and air conditioning, all hydraulic 6-way blade, 30” wide pads with NEW chains and sprockets. Rear and side screens, limb risers. Tight blade with good mold board and cutting edges, no cyli...
$89,500 USD
South Mills, NC
2005 DEERE 650J LGP
- Manufacturer: John Deere
- Model: 650J LGP
- Horsepower: 99 horsepower
- Hours: 8,570 hour
Nice Original John Deere 650J LGP with root rake, Heat and cold A/C, straight sheet metal, good cutting edge, tight blade, clean cabin. Pre Emissions Deere diesel starts easy and burns clean, pushes strong and tr...
$49,500 USD
South Mills, NC
2015 CATERPILLAR D6K2 LGP
- Manufacturer: Caterpillar
- Model: D6K2 LGP
- Horsepower: 130 horsepower
- Hours: 6,991 hour
Enclosed cab with heat and cold air conditioning, all hydraulic 6-way blade, 30” wide pads on a 60% remaining undercarriage, limb risers, side and rear screens. Original factory paint with no damage, inside cab c...
$79,500 USD
South Mills, NC
1996 DEERE 650G LGP
- Manufacturer: John Deere
- Model: 650G LGP
- Horsepower: 90 horsepower
- Hours: 8,459 hour
Open canopy, all hydraulic 6 way blade, 50% undercarriage remaining, wide pads. The pre-emission (NO DEF) diesel engine starts easily and burns clean exhaust, strong transmission, responsive steering. Original fa...
$29,500 USD
South Mills, NC
2004 KOMATSU D65PX-15
- Manufacturer: Komatsu
- Model: D65PX-15
- Horsepower: 205 horsepower
- Hours: 7,784 hour
Enclosed cab, 12’ 8” straight blade with hydraulic tilt, joystick controls for blade and transmission. 36” wide pads in good condition, the rest of the undercarriage needs to be replaced soon. The pre-emission (n...
$29,500 USD
South Mills, NC
2013 DEERE 650K LGP
- Manufacturer: John Deere
- Model: 650K
- Horsepower: 104 horsepower
- Hours: 5,798 hour
John Deere 650K LGP with enclosed cab, heat and A/C, very good undercarriage at 70% plus remaining, the blade is tight and has recently been re-skinned and has a good cutting edge, starts easy and burns clean, cl...
$79,500 USD
South Mills, NC
2015 KOMATSU D37PX-23
- Manufacturer: Komatsu
- Model: D37PX-23
- Horsepower: 89 horsepower
- Hours: 1,159 hour
Enclosed cab with heat and air conditioning, very tight 122” wide all hydraulic 6-way blade. 24” wide pads on a 80% remaining undercarriage. Inside cab is clean with all controls functioning properly. Original fa...
$89,500 USD
South Mills, NC
2010 JOHN DEERE 450J
- Manufacturer: John Deere
- Model: 450J
2010 John Deere 450J If you're looking for a reliable and well-maintained machine, consider the 2010 John Deere 450J. With 8,000 hours and a 6-way blade, this machine weighs around 16,000lbs and is in great shap...
$35,000 USD
Sanford, NC
Case CE 1650 L Dozer
- Manufacturer: Case CE
- Model: 1650 L
Good condition Case CE 1650 L Dozers available between 2008 and 2017 years. Located in USA and other countries. Click request price for more information.
USA