Used Boring Mills in Texas, USA

64" Used Bullard (Cut Master) Vertical Turret Lathe Model 64 Flush Floor

• Manufacturer: Bullard
• Model: Cutmaster 64

1. Turret Slide & Swivel in our facility. Dismantle unit as required. Clean all component parts. 2. Re-machine all bearing surfaces of the Turret Slide to remove localized wear. 3. Re-machine all bearing surfaces...

42" Used Bullard Hi-Column Spiral Drive Vertical Turret Lathe Model 42 ...

• Manufacturer: Bullard
• Model: 42

Reconditioning will take 6 to 8 weeks after receipt of Purchase Order. Photos are for reference only. That machine has been sold.

42" Used Bullard Spiral Drive Vertical Turret Lathe Model 42 Year

• Manufacturer: Bullard
• Model: 42

Machine Will Be Cleaned, Painted And Cycled. Machine Will Be Updated To A New Electric Rapids And Elevation System.

Cincinnati Hy-Pro Model 72 Vertical Turret Lathe

• Manufacturer: Cincinnati
• Model: 72

42" Used Bullard (Cut Master) Vertical Turret Lathe Model 42 Floor Shift

• Manufacturer: Bullard
• Model: Cut Master

Machine Has Been Cleaned, Painted And Cycled. 1. Turret Slide & Swivel in our facility. Dismantle unit as required. Clean all component parts. 2. Remachine all bearing surfaces of the Turret Slide to remove local...

36" Bullard Cutmaster Vertical Turret Lathe

• Manufacturer: Bullard
• Model: Cut Master

1943 BULLARD 54 SPIRAL DRIVE

• Manufacturer: Bullard
• Model: Spiral Drive

54" Used Bullard Vertical Turret Lathe Table Size 50" 4 Jaw Swing Side Head Above Table 56" Swing Side Head Below Table 58" Height Under Rail 39" Table Speed 3.5 To 60 Rpm's Feeds .002 To .500 I.P.R. Turret Head ...

54" Used Bullard Spiral Drive Vertical Turret Lathe Model 54

• Manufacturer: Bullard
• Model: Spiral Drive

Estimated time needed for reconditioning is six to eight weeks.

2009 JOHNFORD BMC-110

• Manufacturer: Johnford
• Model: BMC110

EQUIPPED WITH: Fanuc Series 21i-Model CNC Control 60 Tool Change Magazine Full 4th Axis (B-Axis) Table Rotation Chip Conveyor Watch a demo video at our YouTube page - *All specs are subject to buyer verification

2000 HNK HB-130CX

• Manufacturer: HNK

B-Axis Rotary Table needs repair. See it on YouTube!

GIDDINGS & LEWIS A

• Manufacturer: Giddings & Lewis

Distance from bore to center: 24" | Taper: #50

107" x 3-5/8" Diameter Grooving Bar

Length: 107" | Diameter: 3-5/8" to 1-1/4"

GIDDINGS & LEWIS A

• Manufacturer: Giddings & Lewis

Distance from bore to center: 30" | Taper: #50

22" X 60" Knight Vertical Jig Borer

• Manufacturer: Knight
• Model: 60

Used 22" X 60" Knight Vertical Jig Borer Table Size 22"X 60" Table / Knee Feeds 5/16" To 20 IPM Table Travel Cross 30" Saddle Travel In & Out 18" Spindle To Table Min / Max 6-3/4" / 28-3/4" Spindle Quill Travel 6...