1983 Omera R3/7-3
Diameter: ø700mm | Table: 1300x1100mm | Distance spider-stud doll: 425-825mm | Speed: 8-434rpm | Length: 1300mm | Width: 1360mm | Height: 2300mm | Weight: 2200kg
Värnamo, Sweden
Haeusler HPR 10-H
- Manufacturer: Haeusler
Capacity angle iron ø900mm: 90x90x11 mm | Flat iron: 90x15 mm | Round iron ø600mm: 65 mm | I- & u-beam ø1000mm: NP16 | Bending resistance: 29 cm³ | Engine: 7 kW | Length: 2000 mm | Width: 1470 mm | Height: 1330 ...
Värnamo, Sweden
Värnamo, Sweden
1976 Roundo PS460x3000
- Manufacturer: Roundo
Plate thickness 3x upper roll diameter: 30 mm | Plate thickness 1500mm: 42 mm | Working width: 3000 mm | Over-rolled: 460 mm | Engine: 37 kW | Length: 5850 mm | Width: 2540 mm | Height: 2600 mm | Weight: 30 tons
Värnamo, Sweden
1990 Timac TCDA 310
- Manufacturer: Timac
Max plate thickness: 2mm | Round diameter: 150-1000mm | Gap in stand: 210mm | Gap in turnbuckle: 720mm | Cutting speed: 26/52m/min | Engine: 2 credits | Weight: 650kg
Värnamo, Sweden- Trusted Seller
Round roll Scantool MBR1050x1.5 mm (manual)
- Manufacturer: Scantool
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden Darley protractor GS 3100×16
- Manufacturer: Darley
– Finger guard on the front – Light curtain on the back – Manually adjustable cutting gap – Motorized rear stop
Hässleholm, Sweden- Trusted Seller
GECAM G135 RB8
- Manufacturer: Gecam
Two group sander ideal for deburring, rounding edges and obtaining a perfect finish, thanks to the initial abrasive belt for removing excess burr and a carousel group with 8 abrasive brushes that rotate both cloc...
Stockholm, Sweden 
SWAH edge phase machine
- Manufacturer: Swah
New SWAH edge bevel machine Production no: 3558 | Capacity (capacity of shearing): 0.7 – 1.3 mm | Working height: 1000 mm | Motor output (motor output): 0,5 kW | Table size: 400 x 400 mm | Length: 500 mm | Width:...
Själevad, Sweden
PULLMAX phase machine X-93
- Manufacturer: Pullmax
Used PULLMAX bevel machine X-93 – Max bevel width 25 mm – Max plate thickness 50 mm – Bevel angle 25 – 55 degrees
Själevad, Sweden
Scantool Scan 13 S
- Manufacturer: Scantool
Technical data: 1270x2mm. Fully welded strong construction. Hydraulic auxiliary cylinder. Segment rail. Accessories:
Finspång, Sweden
Finspång, Sweden
Scantool Scan 10 S
- Manufacturer: Scantool
Technical data: 1020 x 2.75mm. With segment rail. Hydraulic auxiliary cylinder. Fully welded strong construction. Accessories:
Finspång, Sweden- Trusted Seller
2011 Schröder MAK V2500/1,5
- Manufacturer: Schroeder
- Model: MAKV 2500/1,5
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden - Trusted Seller
Luna 8266 12-25
- Manufacturer: Luna
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden
Tip: Enter manufacturer, model or keyword