Used Saws in Indiana, USA

CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...

Omga 600 Radial Arm Saw 14" Blade 5Hp Motor 24" 600mm Rip 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. 14" blade This saw is wired for 480V. This is not in new condition. Good used would better describe this unit. Was used in production. 5 hp motor. Can be wired 230 or 4...

Powermatic 72-TA Table Saw 14" Tilting Arbor 7.5Hp 240/480V 3Ph 52" Fence

• Manufacturer: Powermatic

Used, in Good Working Condition, Tested. 7.5 HP motor 208-230/460V 3Ph. Wired for 230V Cast iron top 38x48" If this item ships as Flat Rate Freight please see details in Shipping tab

CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...

CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail

• Manufacturer: CTD Machine

Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...

LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph

• Manufacturer: LeTarte

Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab

12" DAYTON MODEL 4HEW3 METAL / WOOD VERTICAL BAND SAW; 3/4 HP, 16" X 19" TABLE, BAND SPEED: 80 - 3,

• Manufacturer: Dayton

12" DAYTON MODEL 4HEW3 METAL / WOOD VERTICAL BAND SAW; 3/4 HP, 16" X 19" TABLE, BAND SPEED: 80 - 3,000 PPM

CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...

Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche

• Manufacturer: Sampson

Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...

Joy Twistair Screw Compressor TA015T2-3, 125 Max. Pressure

• Manufacturer: Joy

Joy Twistair Screw Compressor TA015T2-3, 125 Max. Pressure

55-Gallon Drum Dolly Low Profile Barrel Handling Equipment Yellow Metal Cart

55-Gallon Drum Dolly Low Profile Barrel Handling Equipment Yellow Metal Cart

55-Gallon Drum Dolly Low Profile Barrel Handling Equipment Yellow Metal Cart

55-Gallon Drum Dolly Low Profile Barrel Handling Equipment Yellow Metal Cart

Baker Advanced Winding Analyzer Motor Tester w/ Leads, 120 VAC, Micro Motion DS012S100SU Mass Flow S

• Manufacturer: Baker

Baker Advanced Winding Analyzer Motor Tester w/ Leads, 120 VAC, Micro Motion DS012S100SU Mass Flow Sensor Transmitter, Micro Motion RFT97121PRU Remote Flow Transmitter, MKS 8005 Control Module, Rosemount 1151LT4E...

Rockwell 10" Unisaw

• Manufacturer: Rockwell

Rockwell 10" Unisaw

Porter Cable Shaper Table, Maxon Valves

• Manufacturer: Maxon

Porter Cable Shaper Table, Maxon Valves