Used Drilling Rigs in New York, USA

CHALLENGER 360 DRILL RIG #836T

Challenger 360 drawworks (500 HP) (rated to 6,500' with 4 1/2" drill pipe), (1) Series 60 12.7 liter 500 HP, Challenger 200 - 84' H - 300,000# SHL derrick,, 10' adjustable substructure, HT - 18" x 44" rotary tabl...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5067T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - Californi...

REICHDRILL C450 D11 CRAWER MOUNTED DRILL RIG #8193T

Built early 2000’s and recently rebuilt, 900/500 air compressor, Cat deck engine (2400 hours), 6500 frame hours, 75% undercarriage, 8.5’W x 11’H, Contact us for additionaldetailsof the rebuild PRICE: $370,000 REI...

2024 LTD 360 RHINO CABLE TOOL DRILL RIG #10685T

• Manufacturer: Rhino

Built 2024, includes 4” x 14’ drill stem, 500’ x 5/8” main line, 5” x 12’ bailer (new), 6” and 10” bits (new), hydraulic controls, auto feed for mainline Price: $95,000

FAILING 1500 DRILL RIG #2826T

• Model: 1500
• Gearbox type: Manual
• Mast Height: 0.9398 meter

FAILING 1500 DRILL RIG

1994 GARDNER DENVER 15W DRILL RIG #4411T

• Manufacturer: Gardner Denver

Manufactured 1994, 10” table, 2 x 4 x 13 centrifugal mud pump, long kelly, air drawworks, mounted on 1994 Western Star truck, drilling daily, drawworks and table recently rebuilt, hydraulic pump cylinders rebuilt...

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG #5453Tc

• Manufacturer: Simco

Diesel engine, cathead, track mounted, no auto hammer Price: $57,500

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

1995 MOBILE B47 AUGER DRILL RIG #619Tb

Manufactured 1995, Deutz ediesel engine, cathead, winch, hydraulic driven, Marooka carrier, no leaks, runs great Price: $87,500

BUCYRUS ERIE 22W SERIES I CABLE TOOL DRILL RIG #3284T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

4 cyl Hercules engine, mounted on 2002 GMC truck with Cat 3126 diesel engine, 6 speed transmission, 1200' of drill line and 1200' of sandline Price: $42,000 - Tennessee BUCYRUS ERIE 22W CABLE TOOL DRILL RIG

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

SIMCO 2400 DRILL RIG #7055T

• Manufacturer: Simco

Freshly rebuilt 4-cylinder Wisconsin gas deck engine (rebuilt with approx 4 hours), 15’ mast, winch line, cathead, 1 speed drill head, new hydraulic pump, mounted on IC35 rubber tracked carrier with 3-cylinder De...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

Failing 250 Drilling Rig

• Manufacturer: Failing
• Model: 250

Good condition Failing 250 Drilling Rigs manufactured in 1985. Located in USA and other countries. Click request price for more information.