PEDDINGHAUS PEDDIMAX NO. 1
- Manufacturer: Peddinghaus
- Model: PEDDIMAX NO 1
Continuing in the footsteps of the legendary 210 series of mechanical ironworkers, the Peddimax No.1 two-station hydraulic ironworkers are designed for continuous production with independent cylinders and a uniqu...
Cuddy, PA- Trusted Seller
Peddinghaus 210A/20 Mechanical Iron Worker 105 Ton 10 HP 550V Notcher Puncher
- Manufacturer: Peddinghaus
- Model: 210A20
Used, in Good Working Condition, Tested. Believe to be a 105 Ton Machine. Notice on the notcher side of the machine the tooling needs to be replaced. This is out of Canada. The motor is wired for 550V. If this it...
- Trusted Seller
PEDDINGHAUS 88 TON HYDRAULIC IRONWORKER
- Manufacturer: Peddinghaus
MODEL- PEDDIWORKER 880 TONS- 88 CAPACITY: -ANGLES- 4″X4″X 3/8″ -ROUND BAR- 1 1/4? -SQUARE BAR- 1 3/16″ -COPING- 2″ X 3/8″ -FLATS- 14″ OF 5/8″ WIRED 230V 3PH EQUIPPED WITH A GOOD SELECTION OF PUNCHES ***ALL ORIGIN...
- Trusted Seller
Peddinghaus Peddimax 110/140 Hydraulic Ironworker
- Manufacturer: Peddinghaus
Comes with a nice selection of punches and wrench. ***ALL ORIGINAL PAINT- MACHINE DID NOT SEE MUCH USE***
- Trusted Seller
Peddinghaus 210/20 Mechanical Ironworker Heavy Capacity w/ Channel & I-Beam Dies
- Manufacturer: Peddinghaus
Peddinghaus 210/20 Mechanical Ironworker Capacity: Angles – 6″ x 1/2″ T- 6″ x 1/2 Squares- solid – 2″ Round – solid – 2 3/16″ C-Channel 10″ – 20 lb I-Beam 9″ 20 lb Coper 5/8″ Wired 460v 3 ph Comes with Channel & ...
- Trusted Seller
Peddinghaus 210A/16
- Manufacturer: Peddinghaus
- Model: 210A16
Peddinghaus 210A/16 71 Ton Mechanical Ironworker 71 Ton Peddinghaus 210A/16, Mechanical, Punching: 1-1/16" Ø through 3/4" Thick Material, 90° Angle: 5" x 5" x 1/2", 45° Angle: 4" x 4" x 3/8", Solid Bar (Round): 1...
Ankeny, IA 
2000 PEDDINGHAUS F1170B
- Manufacturer: Peddinghaus
- Model: F1170B
Fanuc It has just had a new stripper installed that was $4,500
- Trusted Seller
PEDDINGHAUS 1050
- Manufacturer: Peddinghaus
PEDDINGHAUS Peddiworker 1050 Hydraulic Ironworker, used condition. Key specs include 105 T tonnage, 5" angle capacity, and 5.5 hp power. Ideal for high-performance cutting and punching. PEDDINGHAUS Peddiworker 10...
Pomona, CA - Trusted Seller
Peddinghaus HNC 1000 VDE
- Manufacturer: Peddinghaus
Punching line for flat iron and corners - CNC controlled (Siemens Sinumerik) - With CNC automatic length feeding system: 7000 mm - 4 punch stations @ 100 Ton – Cap: Ø 50 in 20 mm thickness - Movements: X=7000 mm,...
Deinze, Belgium - Trusted SellerHørsholm, Denmark
- Trusted SellerHørsholm, Denmark
- Trusted Seller
Peddinghaus Iron Worker
- Manufacturer: Peddinghaus
Machine info: Model 210 A 13 - With automatic profile steel knife - Square notchers - NV up to 27 mm - With bridge saddle - U profiles can't be punched in the flange Angle: 90 ° 110 x 10 45 ° 90 x 9 T 90 ° 110 x ...
Hørsholm, Denmark - Trusted SellerHørsholm, Denmark
- Trusted SellerHørsholm, Denmark
- Trusted SellerHørsholm, Denmark
Tip: Enter manufacturer, model or keyword
