Used Extruders in New Jersey, USA

NOVATEC MDM50S

• Manufacturer: Novatec

Used Novatech model MDM50S desiccant dryer. 460 volt AC input, serial #10-491-0296. No hopper included.

MARSHALL & WILLIAMS 54" Wide

• Manufacturer: Marshall

Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter and are ceramic coated. Top and...

DAVIS STANDARD 48"

• Manufacturer: Davis-Standard

Used Davis Standard sheet take-off unit consisting of (3) 48" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter. Top roll is tungsten and the middle a...

UNA-DYN PD3

• Manufacturer: Una-Dyn

Used Una Dyn model PD3 portable hopper dryer loader. Equipped with approximately 36" diameter X 36" high hopper mounted on cart with wheels. Also mounted on cart is Una Dyn PD3 dryer and Whitlock 1 HP hopper load...

BRI-AIR 9000 lb.

• Manufacturer: BRI-AIR

Used Bri-Air 9000 lb. Capacity (261 cubic feet) insulated hopper mounted on stand. Hopper measure 72" diameter X 92" straight side with 58" long cones. Has three port take-off tubes on hopper discharge.

Conair 3000 Lb.

• Manufacturer: Conair

Used Conair insulated drying hopper having an approximate working capacity of 100 cubic feet. Unit is insulated and mounted on a stand. Includes magnet on the discharge as well as screw conveyor with controls.

ITIB 50/75/125

• Manufacturer: ITIB

Used ITIB 50/75/125 air forming tubing corrugator. Approximately 480 volt, 60 Hz.

1994 LEISTRITZ MICRO 18

• Manufacturer: Leistritz

Used 18mm approximately 28/1 L/D Leistritz Micro-18 Co-Rotating Twin Screw Extruder, serial #473614, new 1994. 500 RPM screw speed. 6 Barrel Segments, Top Ports In Segments 1, 2, and 6. 6 Barrel Zones Controlled ...

RIETER AERO 500

• Manufacturer: Rieter

Used impact dryer for plastic pellets by Rieter (Germany) model Aero 500 in stainless steel design (material 1.4541, Aisi 321). Dryer is equipped with air blower providing 90 M3/min and driven by electric motor w...

CDS CBH25-4

• Manufacturer: CDS

Used CDS 2-belt Puller. Model CBH 25-4, serial #14772-030811. Has nominal 4" wide belts x 25" of contact length. Gap is manually adjustable via hand wheel on top belt. Driven by a 1.5 hp DC motor with SCR control...

CLOEREN 5-Layer

• Manufacturer: CLOEREN

Used Cloeren co-ex block 5-Layer

2002 BOLTON Model BBP-25-A

• Manufacturer: BOLTON

Used Bolton 2-belt Puller. Model BBP-25-A, serial #B11005, new 2002. Has nominal 4″ wide belts with 28″ of contact length. Gap is manually adjustable via hand wheel on top belt. Belts are driven by a 5 HP motor, ...

MAPLAN 527

• Manufacturer: Maplan

Used Maplan Type 527 vacuum/cooling tank. New 1999. Vacuum tank has 18" wide X 12" deep X 20' long stainless steel chamber. Includes (3) vacuum pumps and (1) water pump. Includes operator controls. Has flat plexi...

W & H BUBBLE CAGE

• Manufacturer: W&H

Used 16" W & H bubble cage. Maximum opening 16" X 47" long. Mounted on motorized adjustable frame.

48" Flexlip Flat Film Extrusion Die

Used 48" wide Flexlip flat film extrusion die. No restrictor bar.