Used Extruders in Illinois, USA

Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX.

• Manufacturer: Sigma

54118001 Used - Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX. Tangential Sigma Blades. Bowl is approximately, 54" front to...

Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor

• Manufacturer: TheysohnTheysohn

54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...

Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

• Manufacturer: Welex

54129004 Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barre...

PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (

54129001 Used PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 l...

Xinda PSHJ-35 Twin Screw Extruder – 35.6mm, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, With Conveyor & Cutter – 2021

54023001 Used Xinda Twin Screw Extruder, Model PSHJ-35. 35.6mm screw diameter; 42:1 L/D ratio; 600 RPM screw speed; 30-100 kg/hour output; Clam shell barrel. 15 kW motor, 3/60/480V. Built 2021. With cooling conve...

Leistritz MIC 27-GL-36D Twin Screw Extruder – 27mm, 36:1 L/D, 15.75 HP, Co-/Counter-Rotating, Built 2006

• Manufacturer: Leistritz

10755170 Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05" (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (1) Degassing port. Max...

DAVIS STANDARD 3.5″ SINGLE STAGE 12028

• Manufacturer: Davis-Standard

Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

DAVIS STANDARD 4.5″ SINGLE STAGE 12018

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.

DAVIS STANDARD 4.5″ SINGLE STAGE 12022

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.

DAVIS STANDARD 2.5″ BARREL WITH 2023

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.

UNK MFG 5″ SINGLE SCREW 12404

Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.