Used Extruders in Illinois, USA

WAYNE MFG 3/4″ EXTRUDER 17885

• Manufacturer: Wayne

One used 3/4″ 20:1 L/D Wayne laboratory extruder having a two (2) zone electrically heated, air cooled barrel. Gearbox is belt driven by a 2 HP DC Motor with controls. Unitized temperature control panel with thre...

EGAN 3.5″ EXTRUDER 10949

• Manufacturer: Egan

Egan 3.5″ extruder, S/N JO0787808. 100HP 500-Volt DC motor into a belt driven 11.48:1 gearbox 30:1 L/D electrically heated water cooled vented and plugged barrel on a 65″ centerline. Gearbox is rated for 265HP ma...

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

3.5″ TWO STAGE EXTRUDER SCREW 12026

3.5″ two stage chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft.

3.5″ TWO STAGE EXTRUDER SCREW 12025

Two stage 3.5″ chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft, unknown manufacturer.

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970

• Manufacturer: Leistritz

Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati
• Model: DE

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

CINCINNATI 63mm TWIN SCREW EXTRUDER 19071

Used Cincinnati conical counter rotating twin screw plastic extruder discharge. Nominal 63 mm diameter (2.5″) screws at the discharge and nominal 115 mm diameter screws at the feed. Barrel is electrically heated ...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19063

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N 2058. Shop Order Number 51306. Unit is mounted on a tripod with ca...