Used Extruders in California, USA

Vickers Hydraulic Extruder,

• Manufacturer: Vickers

Vickers Hydraulic Extruder,

3" MERRITT EXTRUDER

• Manufacturer: Merritt

3" MERRITT EXTRUDER 75 HP AC MOTOR 125 MAX RPM 5 BARREL ZONES ONE DIE ZONE HOPPER,SPARE SCREW , BARREL CLAMP AND 14 HOLE STRAND DIE 42" CENTER HEIGHT

Selmi Chocoform Extruder

• Manufacturer: Selmi

Selmi Chocoform Extruder - Built new in 2018 - Serial number 39 - Single head extrusion

Lened I INCH 3 Zone Vari Speed Extruder

• Manufacturer: Lened

LENED I INCH 3 ZONE VARI SPEED EXTRUDER

Aeromatic Nica E-140 Extruder, S/S

• Manufacturer: Aeromatic-Fielder

Aeromatic Nica E-140 Extruder, S/S Used Aeromatic Nica extruder, model E-140, stainless steel construction, nominally rated 0.5-4 liters/minute, with 0.5 hp and 1 hp motors, 230 volt, serial# 605D-058, built 1991.

1.5" Berlyn, 5-Zone Extruder, 30:1 L/D with controls

• Manufacturer: Berlyn

The Berlyn.

Extruder, Mixer, 6", S/st, 10 HP, Pasta #C736485

Pasta mixer/ extruder, stainless steel, complete with 3' x 3' x24" deep tapered bottom hopper with single wand agitator and 6" diameter twin lead screw discharge. Provisions for addition of die plate at screw dis...

Extruder, 4" Dia, Marlen, S/st, Twin Piston, Masa #S742875

• Manufacturer: Marlen

Marlen Twin Piston Continuous Pumping Extruder, model 750, used for corn masa or potato based snack. Product outlet is 4" diameter triple-clamp, Piston size (diameter/stroke) 6" x 14", rated for a maximum output ...

Extruder, 10" Dia, Bonnot, 304 S/st, 10 HP, #S741078

• Manufacturer: Bonnot

Bonnot extruder, 304 stainless steel, jacketed, trough measures 24" x 24" x 32" deep, has 4-1/2" diameter shaft, approximately 15-1/2 diameter x 40" long. Unit is driven by 10 Hp 285/76 volt, 3000/600 rpm 2 speed...

Extruder, 4”, Single Screw, Bonnot, Jacketed, 15 HP, Mild Steel, #5991343

• Manufacturer: Bonnot

Bonnot single screw extruder, model 4", featuring a mild steel barrel and screw with an approximately 4" diameter x 46" long jacketed barrel. The extruder has an 8" x 16" hopper feed size and is driven by a 15 HP...

Extruder, Belt Puller, C/st, 1 HP, Right to Left #S739221

Extrusion Belt Puller - Carbon steel unit with a right-to-left belt measuring 4" x 30". Includes digital speed control and powered by a 1 HP, 180/200V motor operating at 1750 RPM.