Used Centrifugal Separators in Texas, USA

APV D36 92112
- used
- Manufacturer: APV - Gaulin
BOWL IS 38" OD X 39" LONG; HINGED 304SS COVER, CS COATED BOTTOM HOUSING; UNIT HAS A 2" FEED PIPE, 3" OUTLET ON BOTTOM HOUSING; BELT DRIVEN BY A 25 HP 3/60/230/460 VOLT MOTOR WITH VFD CONTROLLER; OVER ALL DIMENSIO...
Cleveland, TX
DORR OLIVER BW-630H 92456
- used
- Manufacturer: Dorr-Oliver
BUILT IN 1994; 630 MM DIA. X 400 LENGTH (24" DIA. X 15" DEEP);
Cleveland, TX
KRAUSS MAFFEI HZ125SI-300-960 88359
- used
- Manufacturer: Krauss-Maffei
BUILT IN 1981; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; FALK GEAR; VARI SPEED; 24" BASKET DEPTH;
Cleveland, TX
KRAUSS MAFFEI HZ125SI-300-960 88358
- used
- Manufacturer: Krauss-Maffei
BUILT IN 1981; BASKET SPEED: 1150 RPM; INSIDE DIA. 1250 MM; FALK GEAR; VARI SPEED; 24" BASKET DEPTH;
Cleveland, TX
HEINKEL HF-1000.1 93643
- used
- Manufacturer: HEINKEL
1000 MM; HORIZONTAL INVERTING; 100 HP VARIABLE FREQUENCY/15 HP VARIABLE FREQUENCY AQXIAL DRIVE; WITH CONTROLS; BUILT IN 1997; 460 VOLT MOTOR ; MAIN ROTATIONAL; AXIAL MOTOR: 15 HP @ 1200 RPM; 460 VOLT; PAC MOTOR: ...
Cleveland, TX
SHARPLES PC81000 86326
- used
- Manufacturer: Sharples
COMPLETE WITH BASE, MOTOR, GEARBOX, GUARDS, AND CONTROLS; PRICE INCLUDES SPARE ASSEMBLY; SPARE BOWL @ TXC; DRIVE AND CONTROL PANEL @ TXC;
Cleveland, TX
Trusted Seller
NOV Brandt SC #4 21 x 36
- used
- Manufacturer: NOV
www.VIDAEQ.com Used As-Is and Where Is Used NOV Brandt SC#4 21x36 Decanter Centrifuge. This machine is in field ready condition with light use since last rebuild and ready to work. Carbon Steel Contact Parts....
San Antonio, TX
Trusted Seller
NOV Brandt HS 3400
- used
- Manufacturer: NOV
Used As-Is and Where Is Used NOV Brandt HS 3400 Decanter Centrifuge. Rebuilt and Balanced 10/29/19 This machine is in field ready condition with light use since last rebuild and ready to work. Stainless Steel...
San Antonio, TX
Trusted Seller
Kemtron 3400
- used
- Manufacturer: Kemtron
Used As-Is and Where Is Used KEMTRON 3400 Decanter Centrifuge. This machine is in field ready condition with light use since last rebuild and ready to work. Stainless Steel Contact Parts. Has 356 mm Diameter X...
San Antonio, TX
SANBORN 60X30 89931
- used
- Manufacturer: SANBORN
TOP LOAD; BOTTOM DISCHARGE DESIGN; 95 LBS/CUFT; Qty: 1 | Alloy: S | Diameter(in"): 60 | Length (ft'in"): 2'6" | Material: 316SS | Driver type: HYDRAULIC | Bowl type: PERFORATED | Bowl speed: 900 | Previous servic...
Cleveland, TX
SHARPLES P1000 45148
- used
- Manufacturer: Sharples
- Model: P1000
TYPE PN14;SUPER-D-CANTER; LESS GEARBOX,MOTOR,TORQUE CONTROL,FEED TUBE,SUBBASE, & GUARDS; 4-1/4"PITCH DBL LEAD CONVEYOR W/HARDSURFACING; (4)ECCENTRIC PLATE DAMS; VAPORSEAL DESIGN; CONICAL BOWL;
Cleveland, TX
SHARPLES P1000 45147
- used
- Manufacturer: Sharples
- Model: P1000
TYPE PN14; SUPER-D-CANTER; S/N 55-PN14-1343; 4-1/4"PITCH DBLLEAD NON HARDSURFACED CONVEYOR; 1 PIECE; 3 SETTING; PLATE DAMS; 165:1 GEARBOX; TORQUE CONTROL; SCREW IMPELLOR DISCH (NO COLLECTOR); VAPORSEAL DESIGN...
Cleveland, TX
KRAUSS MAFFEI HZ1302 68233
- used
- Manufacturer: Krauss-Maffei
1300MM DIA; 15MM THK BASKET; MAX BASKET SPEED 1435 RPM; 350 LITER VOLUME/.3 CAKE CAPACITY; MAX LOAD 852 KG. BELT DRIVEN BY 180 HP, 3/50/380 VOLT, 1435 RPM LOHER MTR; 9/16" WALL;
Cleveland, TX
KRAUSS MAFFEI HZ1302 68232
- used
- Manufacturer: Krauss-Maffei
1300MM DIA; 15MM THK BASKET; MAX BASKET SPEED 1435 RPM; 250 LITER VOLUME/.3 CAKE CAPACITY; MAX LOAD 350 KG. BELT DRIVEN BY 100 HP, 3/50/380 VOLT, 1430 RPM LOHER MTR; 9/16" WALL;
Cleveland, TX
ESCHER-WYSS ZDC-100 43025
- used
- Manufacturer: ESCHER-WYSS
S/N 2870; NEW 1984; COMPLETE W/DRIVE MOTOR, BACKDRIVE, VIBRATION PROTECTION, CIRC OIL SYS, & CONTROLS. ALCOHOL SVC; CONICAL BOWL DESIGN; (CYLINDER-65.5", 10 DEG, -53");
Cleveland, TX
GEA SA Centrifugal Separator
- used
- Manufacturer: GEA
- Model: SA
Good condition GEA SA Centrifugal Separators available between 1976 and 1977 years. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom