Used PDC Processing

2 Liter PDC Glass Reactor, 174#

• used

• Manufacturer: PDC

2 Liter PDC Glass Reactor, 174# Used 2 Liter PDC glass reactor, approximately 3" diameter x 15" deep jacketed glass vessel, rated 174 psi and full vacuum at 391 f internal, flat top and bottom, top mounted .5 hp,...

PDC Neck Bander Sleever, Model 75E

• used

• Manufacturer: PDC

PDC Neck Bander Sleever, Model 75E Used PDC neck bander sleever, model 75E, speeds up to 300 containers/minute, .375 - 3.5" diameter, .625 - 9" high band size range, 480 volt with model KRC184658 PDC tunnel, 18 k...

PDC Neck Bander, Model 40-M

• used

• Manufacturer: PDC
• Model: 40-M

PDC Neck Bander, Model 40-M Used PDC neck bander, model 40-M, 240 volt, 1/4 hp motor, with timing screw, serial# 022.

Hand Applied PDC Steam Tunnel DUAL ZONE STEAM TUNNEL WITH 16’ X 6’ X 6” LOOP CONVEYOR

• used

• Manufacturer: PDC

PDC manually applied shrink label and steam tunnel line with conveyor The entire system is comprised of multiple model/serial numbers. See below: Model: SV-100 Serial numbers: 075 and 105 Model: KST80-712 Serial:...

PDC 45M Neck Bander

• used

• Manufacturer: PDC

The seal applicator can apply heat shrink bands and sleeves. Can reach a speed of up to 80 pieces per minute.

Used PDC Neck Bander, Model 45M

• used

• Manufacturer: PDC

-manufacturer: PDC -model: 45M -serial no. 147 -115 volt -seal applicator that can apply heat srink bands and sleeves at speeds of up to 80 pieces per minute

PDC 15,000 PSIG Diaphragm Hydrogen Gas Compressor

• used

• Manufacturer: PDC

RECONDITIONED PDC model PDC-4-15,000, 30 HP diaphragm gas compressor rated for 34.4 SCFM with 3,000 PSIG inlet pressure and 15,000 PSIG discharge pressure. Note: This compressor requires 3000 PSIG suction pressur...

Reconditioned PDC 30 HP High Pressure Diaphragm Gas Compressor

• used

• Manufacturer: PDC

Reconditioned PDC model PDC-4-3500, single-stage, water-cooled, high pressure diaphragm gas compressor. 30 HP TEFC electric motor Stainless steel tubing Maximum inlet pressure: 600 PSIG Maximum discharge pressure...

Labeler, Shrink Sleeve, Printer, PDC, Mdl R-200 #C743921

• used

• Manufacturer: PDC

PDC Model R-200 Shrink Sleeve Labeler, tamper evident neck bander, set up for 18.5 oz jars, includes 3" diameter sleeve forming tube. Left-to-Right design. Complete 4-1/2" x 10' long stainless steel belt conveyor...

2000 PDC KCR 24

• used

• Manufacturer: PDC

Pdc hot air tunnel for shrink 24 Kwsleeve bander Product id: P71209032 | Offers online: 91 | Length x width x height: - × - × - | Weight: - | State: good | At local norms: ---------

Pdc 45er Tamper-Evident Bander

• used

• Manufacturer: PDC

1-Used pdc model 45er tamper-evident banding/sleeving machine, serial #116. Rated up to 80 units per minute, machine has container timing worm . Driven by 1/4hp single phase, 115 volt motor, machine is mounted on...

Pdc 50 Erl Tamper Evident Neck Bander

• used

• Manufacturer: PDC

PDC KRC Shrink Tunnel For Neck Banders, Stainless Steel

• used

• Manufacturer: PDC

1-Used pdc model krc-123654 stainless steel shrink tunnel, s/n 179. Tunnel has approx. 5 in. Wide opening and is on stainless steel base with adjustable height mechanism. (stock #7953rr)