Used Lathes in Lombardy, Italy

1993 GILDEMEISTER GM26/6 AC Lathe

• Manufacturer: Gildemeister

Multi-spindle automatic lathe Siemens PLC. Round bar passage 26 mm (32 mm oversize) Spindle center distance 240 mm. Bar feed 125 mm. Slide strokes: Main motor power 15 kw. Overall dimensions with bar carrier 6330...

GIANA GF 12 CNC FACING LATHE

• Manufacturer: Giana

Retrofitted in 2000. Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 900 mm. - automatic square turret - chipconveyor - full-covered

CRAVEN 80,5 FOUR SLIDES BED LATHE

• Manufacturer: CRAVEN

Complete with: - n. 1 four jaws table Ø 3.660 mm. - n. 2 closed steadies Ø 305 ÷ 1.016 mm. - n. 2 special supports for crank shafts - upper saddle for threading - crank shafts turning device

LINDERMAIER lathe type TORNOS 125

• Manufacturer: Tornos

Cam-type sliding headstock lathe Type Tornos 12.5 Lindermaier + transfer various units. No. 4 vertical units: drilling/threading. No. 5 horizontal units: Bar passage: 12.2 mm. Rotary table: 10 positions. Clamps w...

1969 GILDEMEISTER lathe AS 32-6

• Manufacturer: Gildemeister

Multi-spindle automatic lathe No. 6 spindles. Feed: Maximum bar feed: 175 mm. Maximum turning length: 100 mm standard. Maximum longitudinal slide travel: 125 mm standard. N. 12 toolholders . Devices and Accessori...

BELT GRINDING FOR LATHE

09930 DYNABRADE MOD. 64993 230 V - 50 HZ - 1 phase 4500 SFPM MATERIAL USED

2003 GILDEMEISTER GMC 35 ISM lathe

• Manufacturer: Gildemeister

Multi-spindle automatic lathe No. 5 cross slides For machining in X / Z. Freely programmable robot For gripping finished parts. No. 5 frontal spindles 4 of which are NC-driven. Front spindles static and motorized...

WICKMAN 5/8″-6 multispindle lathe

• Manufacturer: Wickman

6-spindle automatic lathe Bar diameter: Bar feed: Feed stroke on hexagonal block: 0 - 50.8 mm. Cross slide feed stroke: Lower: 0 - 12.7 mm - Upper: 0 - 12.7 mm - Intermediate: 0 - 8.9 mm Feed range at max. stroke...

HAAS SL 30 THE 2-axis CNC lathe

• Manufacturer: Haas
• Model: SL-30

Used HAAS SL 30 THE 2-Axis CNC Lathe The used HAAS SL 30 THE 2-Axis CNC lathe is a fast, medium-sized, tilt-bed CNC lathe equipped with a tailstock and a 12-station motorized turret with a milled toolholder (Japa...

2002 GILDEMEISTER GMC 35 ISM Lathe

• Manufacturer: Gildemeister

Multi-spindle automatic lathe 5 cross slides For X / Z machining. Pick-up Spindle: in position 6. Freely programmable robot For pick-up of finished parts. 5 front spindles 4 of which are NC operable. 1 complete m...

GIANA GF 12 CNC FACING LATHE

• Manufacturer: Giana

Saddle travels: 1.200 x 650 mm. Complete with: - hydraulic self centering chuck Ø 500 mm. - automatic square turret

1978 GILDEMEISTER lathe AS 32-6

• Manufacturer: Gildemeister

Multi-spindle automatic lathe 6 spindles. Feed: Maximum bar feed: 175 mm. Maximum turning length: 100 mm standard. Maximum longitudinal slide travel: 125 mm standard. No. 12 tool holders. Devices and Accessories:...

TAILSTOCK LATHE GRAZIANO

• Manufacturer: Graziano

08673 TAILSTOCK FOR GRAZIANO SAG 210 point height mm 210 Manual and hydraulic tailstock Duplomatic hydraulic system MATERIAL USED

TAILSTOCK LATHE GRAZIANO

• Manufacturer: Graziano

08675 Tailstock for Graziano SAG 210 Point height mm 210 Manual and hydraulic tailstock Duplomatic hydraulic system USED EQUIPMENT

FIXED LATHE BEZEL

07228 MAX DIAMETER mm 1400 USED EQUIPMENT