Used Dyeing & Finishing in Apulia, Italy

1998 Mezzera jigger, contact me

• Manufacturer: Mezzera

N.1 Viero atmospheric jigger (half-rack), model VGJ, year 1998, effective working height 1800 mm, maximum diameter 1400 mm, tension 10-100 kg, consisting of: original hydraulic unit, original hydraulic drive, ope...

2008 Triveneta dryercontact me

• Manufacturer: Triveneta

Used rotary dryer, Brand Triveneta, Year 2008, Capacity 300 kg, with conveyor belt, Drum diameter 1750 mm, Depth 2450 mm, Volume 5900 dm3. 7 bar, Hourly humidity efficiency 40%, 550/600 kg/h.

Centrifuge usedcontact me

Centrifuge used, Mt124 x h46. Sector: Preparation | Reference: 9GH8

1995 Monti sack staplercontact me

• Manufacturer: Monti

Used sack stapler, Working width: 2200 | Sector: Sewing | Working height: 2200 mm. | Reference: 9956GQ

2001 Monti automatic sewing linecontact me

• Manufacturer: Monti

Year 2001. Table height 2000 mm. Automatic sewing unit with overlocker Turbine vacuum for waste recovery. Combined roll/lap unwinder for simultaneously processing roll and lap fabric.

2006 Tecnoteam fabric folding machinecontact me

• Manufacturer: Tecnoteam

Used folding machine, Fabric folding machine, Electronic numerical control. Output in half-folded folding machines.

1981 Padder Beta usedcontact me

• Manufacturer: Beta

N.1 Beta padder, 3 cylinders, Working height 2100 mm, With output roller as shown in the photo. Year 1981, complete with electrical panel.

Padder Unitechcontact me

• Manufacturer: Unitech

N.1 UNITECH 2-CYLINDER Padder – USED, Table 2200 mm, Complete with: Centering unit (Bianco), Inlet widening unit.

1993 Alea

• Manufacturer: Alea

Alea brand stenter, Year 1993, vertical chain, with clamp and pins, Inspected in 2023, 4 gas-powered fields.

1980 Stenter Artos usedcontact me

• Manufacturer: Artos

Artos/Babcock stenter, Year 1980, Working height 3500 mm, 6 thermal oil-heated fields, Clamp chain and pins, 2 outfeed cutters. Artos 2-cylinder padder, Bianco weft straightener.

1989 Krantz Multi-Stentercontact me

• Manufacturer: Krantz

Krantz brand stenter, Multi-level model, Working height 3200 mm, 12 heating fields in total, 6 small ones. Year 1989, Still in operation.

2003 Stenter Bruckner in 2800mmcontact me

• Manufacturer: Brückner

Bruckner stenter, Year 2003, 6 fields, Gas-powered, Horizontal feed, Working height 2800 mm, Menzel padder, Pleva weft straightener, Cooling area, Flap outlet, Panel with Siemens PP7, PLC, Pleva control.

2005 Stenter Monfortscontact me

• Manufacturer: Monforts

Monforts Montex 6000 Stenter, working width 3.40 m, model 2005, 8 chambers (gas-heated – Maxon burners), Horizontal pin-and-clip chain, Kuster padder, Mahlo weft straightener, Lapper, Cooling cylinder, Doser.

2001 Stenter Reggiani in 3200mmcontact me

• Manufacturer: Reggiani

N.1 Stenter used, Brand Reggiani, year 2001, with 8 fields. 2 Padders: one with three Beta cylinders and two impregnation tanks, one with two Babcock cylinders, maximum height 3200 mm, 15 gas burners, Mahlo weft ...

1998 Stenter Sabencontact me

• Manufacturer: Saben

Saben brand stenter, 5 gas fields, 2400mm cylinders, year 1998, 6-meter chain entry, vertical chain, pins and clips. No weft straightener, no padder.