C.L.O.M.E.A. PICM
- Manufacturer: C.L.O.M.E.A.
PICM Software and Hardware with manual input of the bar-feeding speed, to allow the execution of very short radii and to work on short arcs. Software and Hardware for the management of the automatic bar-reading e...
Scandicci, Italy
C.L.O.M.E.A. PICA
- Manufacturer: C.L.O.M.E.A.
PICA Software and Hardware for the automatic management of the bar-feeding speed calculation, to allow the execution of very short radii and to easily work on short arcs. Software and Hardware for the management ...
Scandicci, Italy
C.L.O.M.E.A. RU130RU130M
- Manufacturer: C.L.O.M.E.A.
RU130 Two adjustable roller benches to support the profiles during the bending process. RU130M Two adjustable reinforced roller benches to support the profiles during the bending process.
Scandicci, Italy
C.L.O.M.E.A. PA03
- Manufacturer: C.L.O.M.E.A.
PA03 PVC runner to support the compressed areas (only for mono-run bending).
Scandicci, Italy
C.L.O.M.E.A. TAPEMS
- Manufacturer: C.L.O.M.E.A.
TAPEMS Sensitive safety mat, including containment edge.
Scandicci, Italy
C.L.O.M.E.A. PEF
- Manufacturer: C.L.O.M.E.A.
PEF Software and Hardware for the management of the automatic bar-reading encoder and the photoelectric cell determining the length of the initial straight section, very useful for repetitive working cycles. Auto...
Scandicci, Italy
Scandicci, Italy
C.L.O.M.E.A. PAF100M
- Manufacturer: C.L.O.M.E.A.
PAF100M Profile filler to compact the sand by means of vibrators to be applied directly to the bar.
Scandicci, Italy
C.L.O.M.E.A. ES40
- Manufacturer: C.L.O.M.E.A.
ES40 Equipment to extract the filling strips from the profile, supplied with roller bench.
Scandicci, Italy
C.L.O.M.E.A. A2002DR
- Manufacturer: C.L.O.M.E.A.
A2002DR Digital reading arcmeter with direct detection of radius and sagitta. Equipped with two interchangeable reading bars, with centre-to-centre distance 120 and 240 mm.
Scandicci, Italy
C.L.O.M.E.A. A2003D
- Manufacturer: C.L.O.M.E.A.
A2003D Digital reading arcmeter complete with software and WI-FI connection for the automatic management of the springback calculation. Equipped with two interchangeable reading bars, with centre-to-centre distan...
Scandicci, Italy
C.L.O.M.E.A. A2002D96
- Manufacturer: C.L.O.M.E.A.
A2002D96 Reading bar with centre-to-centre distance 960 mm to detect large radii.
Scandicci, Italy
C.L.O.M.E.A. A2002D48
- Manufacturer: C.L.O.M.E.A.
A2002D48 Reading bar with centre-to-centre distance 480 mm to detect large radii.
Scandicci, Italy
Scandicci, Italy
C.L.O.M.E.A. AT0018
- Manufacturer: C.L.O.M.E.A.
AT0018 Quality control table for curved profiles, complete with additional shelf, storage compartments for PVC and PE filling strips, compressed air connections and adjustable blocking and stabilizing bars.
Scandicci, Italy
Tip: Enter manufacturer, model or keyword