- Trusted Seller
Toronto Coppersmithing
- Manufacturer: Toronto Coppersmithing
Stainless steel tank with mild steel painted legs and cross peices underneath. The tank is 50.25" diameter x 60" deep (approximately 2000 litre, 525 gallon). It has a flat bottom that slopes to the bottom side ou...
Barrie, Canada - Trusted Seller
Muller Vispro 626808
- Manufacturer: Muller
100 litre capacity stainless steel discharge system for viscous products. Drum is smooth-walled 450 mm. diameter with torispherical bottom. 316L stainless steel, #4 polish and all welds ground smooth with Sanitar...
Barrie, Canada - Trusted Seller
L'Hoir Inc. Manufacturers
- Manufacturer: L'Hoir Inc. Manufacturers
Single wall closed top, dished bottom tank. It has a 12" diameter inlet / manway with a 1 piece lid. The tank is 36" diameter x 30" deep overall (22.5" sidewall), approximately 100 gallons. There is a bottom 2" d...
Barrie, Canada - Trusted Seller
Lee 200-U
- Manufacturer: Lee
All stainless steel jacketed tank with dished bottom. The tank is 35" diameter x 47" sidewall (50" overall). Approximately 200 gallon capacity. The jacket on this tank runs as a coil system on the outside of the ...
Barrie, Canada - Trusted Seller
Charles Ross & Sons
- Manufacturer: Ross
Stainless steel mixing tank with mild steel legs and bridge. The tank is 48" diameter x 34" deep. Approximately 260 gallon. There are 4 baffles that are bolted across the top of the tank (below the bridge) that a...
Barrie, Canada - Trusted Seller
Inox Industries
- Manufacturer: Inox Industries
This all stainless steel pressure tank is has a domed top with 4 - 2" outside diameter sani clamp connections. There is also a 6.5" and 7" outside diameter sani clamp connection inlets. the 6.5" has a sani clamp ...
Barrie, Canada - Trusted Seller
Apache Stainless Equip. Corp. TK T4
- Manufacturer: Apache
This reactor has a cone bottom and sits on load cells. It's approximately 100 gallons. The tank is 32" diameter x 41" deep overall (28" sidewall (24" jacket) & 13" cone). The jacket runs along the side and bottom...
Barrie, Canada - Trusted Seller
WHE Bio-Systems Inc.
- Manufacturer: WHE Bio-Systems Inc.
2 identical stainless steel dimple jacketed tanks with vacuum capabilities with a Lightnin mixer. The tank has a dish top with a 17" manway (certified by Paul Meuller). It has 6 sani clamp inlets (3 - 2.5" and 3 ...
Barrie, Canada - Trusted Seller
41″ Brush Box with Drain Plug: Painted with Trailer Tongue Mounting Brackets Included
- Manufacturer: Seal-Rite
41″ Brush Box: Painted with Trailer Tongue Mounting Brackets Included. Brush Box with Drain Plug is 41″ x 10 3/4″ x 20″ When ordering please state Seal-Rite Trailer model. (i.e. SR-700 Trailer, PA 550 Trailer, HA...
Pickering, Canada - Trusted Seller
50″ Brush Box with Drain Plug: Painted with Trailer Tongue Mounting Brackets Included
- Manufacturer: Seal-Rite
50” Brush Box with Drain Plug: Painted with Trailer Tongue Mounting Brackets Included ***Please specify what size trailer this will mount to so that you receive the correct brackets. List your unit size in the c...
Pickering, Canada - Trusted Seller
1/2″ x 1/4″ Push-In Tubing Fitting
- Manufacturer: Seal-Rite
1/2″ x 1/4″ Push-In Tubing Fitting – Temperature safe up to 200°F, not for use with drinking water. Temperature Range – (°F)- 40 to + 200 Tube O.D. Size – 1/4 inch Male Pipe, 1/2 inch Tube O.D. Note: These prod...
Pickering, Canada - Trusted Seller
Wilden 1/4″ 5 gpm Air-Operated, Dual-Diaphragm Pump Rebuild Kit
- Manufacturer: Wilden
5 gpm 1/4″ Wilden Air-Operated, Dual-Diaphragm Pump Rebuild Kit (Note: Rebuilding this pump may, or may not alleviate any problems – this item is non-returnable.) Kit includes two tee sections, four o-rings, 4 ba...
Pickering, Canada - Trusted Seller
2008 750 bbl Storage Tank
- Manufacturer: GLM
750 bbl tank Service type: Sweet | Pasc condition rating: B | Connection status: Connected | Capacity: 750 bbl | Capacity(unit of measure): bbl | Capacity(use selected unit of measure as display unit): false | Ta...
Ottawa, Canada - Trusted Seller
Muller Vispro 4626898
- Manufacturer: Muller
200 litre capacity stainless steel discharge system for viscous products. Drum is smooth walled, 560 mm diameter with torispherical bottom. 316L stainless steel, #4 polish and all welds ground smooth with sanitar...
Barrie, Canada - Trusted Seller
50″ Brush Box with Drain Plug: Painted, with Flat Tabs Welded On
- Manufacturer: Seal-Rite
50” Brush Box with Drain Plug: Painted, with Flat Tabs Welded On (for mounting to a flat surface) *Ships freight
Pickering, Canada
Tip: Enter manufacturer, model or keyword
