- Trusted Seller
Pagus - Your machine trade for used machinery and equipment
- Manufacturer: Pagus
Faceplate WMW Ø 483 mm Bore: Ø 105 mm, length: 40 mm with internal thread: M105 x 6.0, length: 35 mm 8x slotted hole: Ø 19.5 mm, length: 75 mm 4x slotted hole: Ø 19.5 mm, length: 95 mm with one-piece reversible j...
Zschepplin, Germany - Trusted Seller
Pagus - Your machine trade for used machinery and equipment
- Manufacturer: Pagus
Faceplate WMW ROTO RECORD Ø 500 mm 8x Slotted Holes: Ø 19.5 mm, Length: 90 mm 4x Slotted Holes: Ø 19.5 mm, Length: 100 mm with one-piece reversing jaws Machine side: Mounting ring: Diameter: Ø 217 / 191 mm, Width...
Zschepplin, Germany - Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outside ø: 250 mm | Bolt circle ø (chuck): 230 mm | Bore ø: 80 mm | Height with jaws: 140 mm | Dimensions: 250 x 250 x 140 mm
$209 USDZschepplin, Germany - Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !
$791 USDZschepplin, Germany - Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200mm Flange: 155 mm | Bolt circle: 174 mm | Height with jaws: 100 mm | Bore: 55 mm | Square for key: 11.5 mm | Dimensions: 200 x 100 mm
$209 USDZschepplin, Germany - Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS with second set of jaws ! used, tested !
$1,454 USDZschepplin, Germany - Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-Jaw Chuck, Three-Jaw Chuck with External Jaws PAGUS Short Taper with 3 Additional External Jaws with Wrench Used, Tested!
$302 USDZschepplin, Germany - Trusted Seller
PAGUS rotary table for lathe chuck
- Manufacturer: Pagus
Rotary table for lathe chuck PAGUS 360 ° rotatable Used!
$262 USDZschepplin, Germany - Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS Bore Ø: 61 /70 mm, with thread, pitch: 6.0 mm used, checked!
$256 USDZschepplin, Germany - Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, checked!
$488 USDZschepplin, Germany - Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x bore: Ø 19 mm, depth: 8 mm Cone: Ø 103 /106 mm, depth: 15 mm used, checked!
$442 USDZschepplin, Germany - Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
Faceplate PAGUS preserved ! Outside ø: 630 mm | Hole circle ø: 170 mm | Bore ø: 135 mm | Dimensions: 630 x 630 x 185 mm
$988 USDZschepplin, Germany - Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS Short cone Outside diameter: 400 mm | Bolt circle: 135 mm | Bore diameter: 100 mm | Height with jaws: 140 mm | Flange: 175 mm | Total height: 190 mm | Dimensions: 400x 200 mm
$523 USDZschepplin, Germany - Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS grooves. 14/24 mm Outer ø: 295 mm | Bolt circle ø: 104 mm | Bore ø: 60 mm | N max: 600 rpm | Dimensions: 295 x 295 x 40 mm
$174 USDZschepplin, Germany - Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS Bore M8 /M12 and 4 x Ø 12 mm Outer ø: 360 mm | Bore center ø: 20 mm with thread | Flange: Ø 250 mm | Bolt circle inside: Ø 135 mm | Bolt circle outside: Ø 225 mm | Thickness with flange: 55 mm | D...
$314 USDZschepplin, Germany
Tip: Enter manufacturer, model or keyword