Used Pagus Lathes in Saxony, Germany

PAGUS face plate

• Manufacturer: Pagus

Faceplate Pagus used, tested ! External ø: 700 mm | Hole circle ø: 150 mm | Bore ø: 95 mm | Flange ø: 195 mm | Dimensions: 700 x 700 x 113 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS short cone used, tested ! External ø: 400 mm | Flange: 155 mm | Hole circle: 134 mm | Bore ø: 110 mm | Height with jaws: 140 mm | Total height: 190 mm | Dimensions: 400 x 400 x 200 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS with reversible jaws ! used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS bore Ø: 61 / 70 mm, with thread, pitch: 6.0 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x hole: Ø 19 mm, depth: 8 mm cone: Ø 103 / 106 mm, depth: 15 mm used, tested !

PAGUS Tailstock

• Manufacturer: Pagus

Tailstock, bearing pedestal PAGUS 8x threaded hole: M10 x 1.5, depth: 20 mm ( continuous ) 4x threaded hole: M8 x 1.25, depth: 20 mm ( continuous ) used, tested !

PAGUS face plate

• Manufacturer: Pagus

Protección contra colisiones 2022 de A-SAFE – R-01-01-0006 100 mm 33375

PAGUS 3-jaw chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck, lathe chuck PAGUS Ø 250 mm with chuck key ! used, tested !

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x5 ( PL315x5 ) TGL 30-22313 mounting flange: Ø 79 / 81 mm, depth: 13 mm ( conical ) with one-piece reversible jaws used, tested !

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x6 TGL 30-22313 New ! preserved !

carro de servicio 20 pies de alta resistencia

Rotary table with 4 jaw chucks PAGUS Rotary chuck 360° rotatable ( manual, without gear ) with 15° detent ( small lever ) two levers for clamping the lathe chuck used, tested !

rompevientos - entrada

Center point, lathe point, center punch point, live center PAGUS MK5 thread: diameter: Ø 55 mm, pitch: 3.5 mm, length: 20mm used, tested !