- Trusted Seller
Rear Bowl Seal for F & ST Model Semitool / Rhetech SRD
- Manufacturer: Semitool
- Model: C225
Seal for Rear Bowl on SITEK / Semitool / Rhetech Spin Rinse Dryer Rear Bowl / Motor Seal for SITEK / Semitool / Rhetech Spin Rinse Dryers. This seal works on all F model SRDs and these ST models: ST-240, ST-260, ...
Rocklin, CA - Trusted Seller
ACR Valve for DI Water Recirculation on SITEK / Semitool SRD
- Manufacturer: Semitool
- Model: C225
ACR Valve for DI Water Recirculation on SITEK / Semitool / Rhetech Spin Rinse Dryer This ACR valve is used for DI water recirculation. It features a 3/8″T x 3/8″T x 1/4″F x 1/4″F x 1/4″F compression design. Past ...
Rocklin, CA - Trusted Seller
30-Slot Optical Sensor Disc for SITEK & Semitool SRD
- Manufacturer: Semitool
- Model: C225
30-Slot Decoder Wheel. This Optical Sensor Disc is part of the Cam Assembly for Brush or Brushless Motors on Semitool & Rhetech Spin Rinse Dryers. SITEK Part Numbers: 06-00364 Part Numbers: 03-124010 ST2155 12985...
Rocklin, CA - Trusted Seller
QD Bolt with O-Ring for Rotor Mount on SITEK / Semitool SRD
- Manufacturer: Semitool
- Model: C225
QD Bolt with O-Ring for Rotor Mount on SITEK / Semitool / Rhetech Spin Rinse Dryer Quick disconnect bolt used to mount the rotor to the half shaft. O-Ring part number needed: 06-00624 Past Possible Part Numbers: ...
Rocklin, CA - Trusted Seller
Umbilical Cord for the PSC-101 Controller on SITEK & Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-101
Umbilical Cord for the PSC-101 on S/F-Model Spin Rinse Dryer Controllers. This Cable connects the back of the Controller to the top of the SRD Head Assembly. SITEK Part Numbers: 06-00544 06-00545
Rocklin, CA - Trusted Seller
Brush Motor for ST & F Model Semitool SRD – Straight Shaft
- Manufacturer: Semitool
- Model: C225
Brush Motor for ST & F Model Semitool / Rhetech Spin Rinse Dryer – Straight Shaft This brush-type motor is designed for use with Semitool “ST” or “F” model Spin Rinse Dryers equipped with a straight shaft rotor d...
Rocklin, CA - Trusted Seller
Gasket for DI Manifold on SITEK & Semitool 2300/4300/8300 SRD
- Manufacturer: Semitool
- Model: C225
This labyrinth-style cap seal retainer has a 2.0″ inner diameter and is used in SITEK / Semitool / Rhetech Spin Rinse Dryers. 2.0″ ID Labyrinth-style design for cap seal retention Compatible with S, F, and ST mod...
Rocklin, CA - Trusted Seller
Door Seal for SITEK & Semitool 240/440/840 SRD
- Manufacturer: Semitool
- Model: C225
This door seal is used with 240-style windows featuring a thin channel on SITEK / Semitool / Rhetech Spin Rinse Dryers. The seal measures 0.206″ wide. Designed for thin channel 240 windows Compatible with S, F, a...
Rocklin, CA - Trusted Seller
Door Seal for SITEK & Semitool 270/470/870 SRD
- Manufacturer: Semitool
- Model: C225
These door seals are designed for 270-style windows on SITEK / Semitool / Rhetech Spin Rinse Dryers and are available in two widths to fit either thick or thin channel designs. Options: Thick Door Seal – 0.306″ w...
Rocklin, CA - Trusted Seller
12 Position Manifold for DI Water on 2300 SITEK & Semitool SRD
- Manufacturer: Semitool
- Model: C225
This 12-position DI water manifold features Flaretek-style fittings and is designed for use on SITEK / Semitool / Rhetech Spin Rinse Dryers. 12 DI water outlet positions Flaretek fittings for high-purity connecti...
Rocklin, CA - Trusted Seller
Door Seal for SITEK & Semitool 280/480/880 SRD
- Manufacturer: Semitool
- Model: C225
These door seals are designed for 280-style windows on SITEK / Semitool / Rhetech Spin Rinse Dryers and are available in two widths to fit either thick or thin channel designs. Options: Thick Door Seal – 0.306″ w...
Rocklin, CA - Trusted Seller
3/8″ Valve Actuator for SITEK & Semitool SRD/SST/SAT
- Manufacturer: Semitool
- Model: C225
This 3/8″ valve actuator is primarily used in Semitool and Rhetech systems, including SRD (Spin Rinse Dryer), SST (Spray Solvent Tool), and SAT (Spray Acid Tool). It features a tapered poppet design and is constr...
Rocklin, CA - Trusted Seller
8 Position Manifold for DI Water on SITEK & Semitool 260 & 270 SRD
- Manufacturer: Semitool
- Model: C225
This 8-position DI water manifold mounts to the top of Semitool 260 and 270 bowl assemblies on SITEK / Semitool / Rhetech Spin Rinse Dryers. 8 outlet positions for DI water flow Designed for 260 and 270 bowl conf...
Rocklin, CA - Trusted Seller
Door Seal for SITEK & Semitool 2300/4300/8300 Series SRD
- Manufacturer: Semitool
- Model: C225
This door seal is used with 2300-style windows featuring a thick channel on SITEK / Semitool / Rhetech Spin Rinse Dryers. The seal measures 0.306″ wide. Designed for thick channel 2300 windows Compatible with S, ...
Rocklin, CA - Trusted Seller
1/2 HP Brush Motor with 8 1/8″ tapered Shaft for SITEK & Semitool SRD
- Manufacturer: Semitool
- Model: C225
Refurbished Motor for Semitool ST/F 280 & 2300 Models. Motor windings are cleaned, brushes and bearings replaced. Unit is bench tested after rebuild. Stepped type shaft 1/2 horsepower 3800 RPM 90VDC 5.7 AMPS Shaf...
Rocklin, CA 
Semitool PSC 101 Supporting equipment (semiconductors)
- Manufacturer: Semitool
- Model: PSC-101
Good condition Semitool PSC 101 Supporting equipment (semiconductors)s manufactured in 1996. Located in Italy and other countries. Click request price for more information.
Italy
Tip: Enter manufacturer, model or keyword