New Slitters & Slitting Lines in Germany

Amacker + Schmid shear cut roll slitter type RKS

• Manufacturer: Schmid

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm. SWISS QUALITY MANUFACTURING Roll w...

GARANT LONGSLIT 1013 P

• Manufacturer: Garant

Slitter rewinder for paper Mother roll diameter: Max. 1300 mm | Max. 51.18 inch | Working width: 1350 / 1500 mm | 53.15 / 59.06 inch | Minimum slitting width: 25 mm | 0.98 inch | Finished roll diameter: 1300 mm |...

GARANT Core Cutter T5

• Manufacturer: Garant

Inner core diameter: 76/152 mm | 2.99 / 5.98 inch | Wall thickness: up to 15 mm | up to 0.59 inch | Core length: up to 2000 mm | up to 78.74 inch | Roll diameter for cardboard cores: up to 15 mm | up to 0.59 inch

Circular cardboard scissors (length cutter)

The circular cardboard shears are designed for longitudinal cutting of thick material webs (e.g. cardboard, leather, rubber, sponge cloth, etc.). The sturdy design safely absorbs the high forces that occur during...

Longitudinal cutting system type LSA 4/25/1600

Length cutter for weighted film web

With the "crush cut" cutting process used here (crush cut knife on glass-hard sleeve), a wide variety of materials (e.g. weighted film web, max. 6 mm thick) can be cut without any problems.

Trimming device as an exchangeable cassette

• Maximum thickness: 2 millimeter

The trimming device is equipped with 2 sawing units and is used for trimming a rigid material web (e.g. laminate web, etc.). A special feature here is the design as an interchangeable cassette. Depending on the m...

Longitudinal cutter with tangential cut

With this cutting process a wide variety of materials (e.g. paper, foil, textiles, etc.) can be cut without any problems. By equipping it with a pneumatically operated lower knife shaft and individually adjustabl...