- Trusted Seller
1/2 HP Brushless Motor for SITEK & Semitool SRDs
- Manufacturer: Semitool
Brushless Motor compatible with Semitool & Rhetech S Model SRDs using the following Controllers: PSC 101 PSC 102 SlickDevice S1 SlickDevice S2 Part Numbers: 06-00140, 06-00140-R 06-00036, 06-00036-R 17410-01, 174...
Rocklin, CA - Trusted Seller
Teflon Tubing for Rotor Retaining Bars on SITEK & Semitool SRDs
- Manufacturer: Semitool
Teflon Tubing (1/2″OD x 3/8″ID, FEP) for Rotor Retaining Bars on SITEK / Semitool / Rhetech Spin Rinse Dryers This FEP Teflon tubing is used on rotor retaining bars within Spin Rinse Dryers. Supplied in 1-foot in...
Rocklin, CA - Trusted Seller
Refurbished 1/2HP Brush Motor for SITEK & Semitool SRDs
- Manufacturer: Semitool
Refurbished Motor for Semitool & Rhetech ST or F Model SRDs with a tapered Rotor Drive Plate. Stepped type shaft 1/2 horsepower 3800 RPM 90VDC 5.7 AMPS Shaft length: 8 3/8″ SITEK Part Numbers: 06-00128 06-00128-R
Rocklin, CA - Trusted Seller
QD Bolt with O-Ring for Rotor Mount on SITEK & Semitool SRDs
- Manufacturer: Semitool
QD Bolt with O-Ring for Rotor Mount on SITEK / Semitool / Rhetech Spin Rinse Dryer Quick disconnect bolt used to mount the rotor to the half shaft. O-Ring part number needed: 06-00624 Past Possible Part Numbers: ...
Rocklin, CA 
LTN SEMICONDUCTOR EQUIPMENT LTN-17447-01
- Manufacturer: LTN
LTN SEMICONDUCTOR EQUIPMENT LTN-17447-01 The system was de-installed in working operational condition. All returns must comply with the stated Return Policy. Please continue: PAYMENT OPTIONS: We accept PayPal...
$95 USDCarpinteria, CA- Trusted Seller
Brush Motor with Straight Shaft for ST & F Model Semitool SRDs
- Manufacturer: Semitool
Brush Motor for ST & F Model Semitool / Rhetech Spin Rinse Dryer – Straight Shaft This brush-type motor is designed for use with Semitool “ST” or “F” model Spin Rinse Dryers equipped with a straight shaft rotor d...
Rocklin, CA - Trusted Seller
Refurbished – LC-4 Servo Amp for SITEK & Semitool S-Model SRDs
- Manufacturer: Semitool
This is a refurbished model of the discontinued LC-4 Servo Amp, used in S-Model Systems wired for 110V-120V power. It replaces legacy Automotion Control/Electrocraft models LC4BP03002 and LC4BP13002, and is compa...
Rocklin, CA 
SVG ARM LTN SEMICONDUCTOR EQUIPMENT 99-16214-01
- Manufacturer: SVG
Information: SVG ARM LTN SEMICONDUCTOR EQUIPMENT 99-16214-01 Equipment demonstrations available upon request with an additional fee. All returns must comply with stated Return Policy. Please continue: P...
$3,995 USDCarpinteria, CA- Trusted Seller
LC-4CP Servo Amp for SITEK & Semitool S-Model SRDs
- Manufacturer: Semitool
This new SITEK Servo Amp, is designed as a direct replacement for the discontinued LC-4 Servo Amp, used in TEL/FSI/Mercury Systems. It replaces legacy Automotion Control/Electrocraft models LC4CP03002 and LC4CP11...
Rocklin, CA 
SEMICONDUCTOR PRECISION INDUSTRIES HEXAGONAL STAINLESS WITH CERAMIC CODING
- Manufacturer: Precision Stainless
INFORMATION SEMICONDUCTOR PRECISION INDUSTRIES HEXAGONAL STAINLESS WITH CERAMIC CODING System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue:...
$99 USDSanta Barbara, CA- Trusted Seller
1/2 HP Brush Motor with 8 1/8″ tapered Shaft for SITEK & Semitool SRDs
- Manufacturer: Semitool
Refurbished Motor for Semitool ST/F 280 & 2300 Models. Motor windings are cleaned, brushes and bearings replaced. Unit is bench tested after rebuild. Stepped type shaft 1/2 horsepower 3800 RPM 90VDC 5.7 AMPS Shaf...
Rocklin, CA 
SEMITOOL 16790-01 CURRENT LIMIT 12 V BOARD
- Manufacturer: Semitool
INFORMATION: SEMITOOL 16790-01 CURRENT LIMIT 12 V BOARD System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept Pay...
$1,299 USDSanta Barbara, CA
SEMILAB CABLE FOR CCD DET M67 SPSO-358
- Manufacturer: Semilab
SEMILAB CABLE FOR CCD DET M67 SPSO-358 System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept PayPal, Company C...
$229 USDCarpinteria, CA
O-RING 279 SEMICORE SPUTTER
INFORMATION: O-RING 279 SEMICORE SPUTTER System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept Paypal, Company Ch...
$45 USDSanta Barbara, CA- Trusted Seller
Labyrinth Seal Assembly for SITEK & Semitool SRDs
- Manufacturer: Semitool
Labyrinth Seal Assembly (1.5″ Diameter, 316SS) for SITEK / Semitool / Rhetech Spin Rinse Dryers This 1.5″ Labyrinth Seal Assembly is manufactured from durable 316 stainless steel and is used in Spin Rinse Dryer s...
Rocklin, CA 
KLA-Tencor P-10 Metrology / Inspection (semiconductors)
- Manufacturer: KLA-Tencor
- Model: P-10
Good condition KLA-Tencor P-10 Metrology / Inspection (semiconductors)s manufactured in 1997. Located in South Korea and other countries. Click request price for more information.
South Korea
Tip: Enter manufacturer, model or keyword