Used Metrology / Inspection (Semiconductors) in California, USA

MKS TYPE 270 A

• Manufacturer: MKS

INCLUDES: MKS TYPE 270 A System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: TAXES & FEES: California Sales Tax applies if order within Ca...

CALIBRATION STANDARD

INFORMATION CALIBRATION STANDARD System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept Paypal, Company Check, Wir...

MTI INSTRUMENTS ACCUMEASURE 5000

• Manufacturer: MTI

INFORMATION MTI INSTRUMENTS ACCUMEASURE 5000 System was de-installed in working operational condition. All returns must comply with stated Return Policy. Please continue: PAYMENT OPTIONS: We accept Paypal, Compan...

Cascade Microtech WPH-001-200

• Manufacturer: Cascade Microtech

Planarizing probe tip Sort: 0

Micromanipulator 2250 Large Area Panel Prober

Large area flat panel prober with 36"x48" air isolation table, 14.5" x 14.5" stage with quick load feature (16" travel front to back), each 34"x4" platen has independent X-motion with track drive for manipulators...

Tropel 8240-FSI 100mm Wafer Chuck

• Manufacturer: FSI

100mm wafer chuck for Tropel flatness monitor. Sort: 0

CyberOptics Cyberscan Cobra Laser Non-Contact Surface Profiler- NO software

• Manufacturer: Cyberoptics

Main unit has 50.8mm arm travel 50.8mm focus micrometer travel 2um RMS stage flatness full travel DRS-500 sensor has 0.125um resolution, 1um accuracy, 17mm standoff, and 16-23um spot size Also available DRS-2...

Karl Suss Prober Dark Box

• Manufacturer: SÜSS MicroTec

Karl Suss Dark Box exterior dims 45x35x76"h interior dims 40x34x43"h note: this dark box does not have a bottom. It is designed to be set on a TMC isolation table.

Newport XYZ Micropositioners, pair

• Manufacturer: Newport

XYZ positioner with vacuum base and micrometer adjustment, priced per pair.

Suss PH400 manual Submicron Positioner with vacuum base

• Manufacturer: SÜSS MicroTec

2 available ultra high resolution remote control XY travel range 10mm Z range 8mm 0.2 micron resolution See attached PDF for full specifications

Suss Microtec PH250HF manual high frequency probehead with 3um resolution

• Manufacturer: SÜSS MicroTec

bolt down base 120mm x 124mm Z axis micrometer 0-10mm travel X&Y micrometers 0-25mm travel wee PDF below for complete specifications

Micromanipulator 72-3-R-XX probe

Priced each, NEW, UNUSED Designed to work with all Micromanipulator manipulators and 7 series tips Lead wire terminates in a circular eye connector with an approximately 1/16 inch (1.6mm) hole for connection to...

Micromanipulator 350 micropositioner- right hand for probing 2-6 micron geometries

Micromanipulator model 350 micropositioner- right hand For probing 2-6 micron geometries magnetic base 3 available

Micromanipulator 250 micropositioner- left hand for probing 2-6 micron geometries

Micromanipulator 250 micropositioner- left hand For probing 2-6 micron geometries magnetic base 2 available

TNP Instruments Micropositioners with vacuum base

Sort: 0