New Saws in USA

NEW - 3 X .125 FMS XD-76 NC MILLING FLYING SAW MACHINE

The milling cutting type flying cut-off cold saw is developed from advanced technology to fit the demand of markets in burr-free cutting for round pipes, square pipe, and shaped pipes. (2) Fixed length accura...

43" x 43" COSEN "SV-1100" SEMI-AUTOMATIC TRAVELING-TABLE VERTICAL BAND SAW (BRAND NEW NEVER USED) w/20 HP BLADE MOTOR

• Manufacturer: Cosen
• Model: SV-1100

43" COSEN SEMI-AUTOMATIC TRAVELLING-TABLE Imperial Metric VERTICAL BAND SAW NEVER BEEN USED, Serial No SV1030012, Model SV1100 EQUIPPED WITH: Control Panel Semi-Automatic Hydraulically Traversing Table Hydraulic ...

PM-712G Horizontal / Vertical Band Saw

• Manufacturer: Precision Matthews
• Model: PM-712G

HIGH QUALITY, PROFESSIONAL LEVEL band saw, built for years of use Oil bath geared transmission for long life, with QUICK CHANGE LEVER SPEED SELECTION – Change speeds in a second by only moving a lever. No belts t...

5″ (127mm) ERWTech/UCG High Speed Flying Cold Saw #New 5" Cold Saw

ERWTech/UCG Touch Screen Controls Length Measurement System Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds ...

ERWTech/UCG High-Speed Flying Cold Saw, Double-Cut #New ERWTech Cold Saw Double Cut

Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds reaching up to 300 feet per minute (FPM), each saw is equipp...

CS-350 Cold Saw, 14", Variable Speed

• Manufacturer: Precision Matthews
• Model: CS-350

Operates on 220V Single Phase Power VARIABLE BLADE SPEEDS for the best cutting speed to match the job from 24-120 RPM Quick Acting lever for angle changes, can be done in only a few seconds This saw has a 90 degr...

3-1/2″ (89mm) ERWTech/UCG High Speed Flying Cold Saw #New 3-1/2" Cold Saw

ERWTech/UCG Touch Screen Controls Length Measurement System Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds ...

CS-315 Cold Saw, 12.5", Single Speed

• Manufacturer: Precision Matthews
• Model: CS-315

Operates on 220V Single Phase Power Quick Acting lever for angle changes, can be done in only a few seconds Quick Acting vise lever, for faster operation on multiple cuts of the same size Miters 45 degrees, both ...

CS-315V Cold Saw, 12.5", Variable Speed

• Manufacturer: Precision Matthews
• Model: CS-315V

Operates on 220V Single Phase Power Variable Speed from 15-120 RPMs allow user to dial in blade speed to the job for even better performance Quick Acting lever for angle changes, can be done in only a few seconds...

Matrix II Bi Metal Saw Blade, 8/12 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 8/12 tooth blade for general purpose cutting of many different shapes and sizes Variable blade pitch offers more efficient cutting action wi...

NEW FMS FCS-76-4 FLYING CUT-OFF COLD SAW; REF. NO. M1240

• Manufacturer: Freedom

Model: FMS FCS-76-4 Cutting Type: Cold Saw Cutting Type, Leaves no or minimum burr at the tube end Hands of Operation: Dual Direction - Hand of Operation Line Center Level: To be determined Production Capability...

Matrix II Bi Metal Saw Blade, 6/10 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 6/10 tooth blade for thicker materials, solid rounds, solid rectangles, etc. Variable blade pitch offers more efficient cutting action with ...

Matrix II Bi Metal Saw Blade, 10/14 TPI, 3/4x.035x93

• Manufacturer: Precision Matthews

Pre Welded, Sized to fit our PM-712G Band Saw, and many others Use this 10/14 tooth blade for thinner wall materials, tubing, and structural shapes Variable blade pitch offers more efficient cutting action with l...

NEW 3 TO FMS FCO-CS-76-3 MILLING TYPE COLD SAW

SPECIFICATIONS EQUIPMENT SUMMARY 1 x Cut-Off Main Body Unit Including: 1 x Measuring Roll Stand with Encoder: 1 x Computerized Cut-Off Control System: Condition: New.

Laguna P14|10 Panel Saw

• Manufacturer: Laguna

The sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly. ...