New Notching Machines in Massachusetts, USA

Model 1800 Drive Cleat Shear

Mounts readily to any bench. Easy, spring-loaded push handle. 24 Gauge capacity. Easy to change shear blades. This tool will give drive cleats a rounded end for easier installation. Material may be rounded before...

Tennsmith Notchers

• Manufacturer: Tennsmith
• Model: 16-18

The Tennsmith notcher is a versatile, heavy-duty bench tool for shearing, notching and piercing work. The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rat...

Haco – COMBI 220/6

• Manufacturer: Haco - Atlantic
• Model: COMBI 220/6

The COMBI series are variable angle with 6mm notching capacity and with punch/or bending attachment. The COMBI has a notching capacity of 6mm, a blade length of 220mm and has variable angle between 30 and 140 deg...

No. 542 45° Hand Notcher w/ 45° Blade & Die

Designed for notching either 90° (No. 541) or 45° (No. 542) up to 20 gauge mild steel with minimal effort. The No. 541 Series notcher is capable of a 1″ depth of notch featuring a built-in metal stop.

TK Edge Notcher

See . Motor – 1/3 HP, 110v, Single Phase, 60Hz AC Capacity – 20 Gauge Mild Steel Speed – Variable Minimum 18 FPM Overall Dimensions – 21″ Long, 16 1/2″ High, 13″ Deep Approx. Shipping Weight – 290 Lbs. V is at 15...

AL100U-01

The AL100U-01 produces gap-free fits ready for welding, with minimal vibration. It is equipped with a hand lever feed handle & manual vise that can be adjusted right or left. Grinds notches of any desired angle f...

TK 1016 Duct Notcher (includes 5 Heads)

QuickNotch, Hydraulic Duct Notcher. Notches up to 6 times faster than hand notching. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Dri...

AL1-2U

Powered combination of AL1, AL2 & ALU notchers for a perfect & quick 90 degree notch or vent notch. Can notch 3/4″, 1″, 1-1/4″, 1-1/2″ and 2″ up to schedule 40 wall thickness; plus it’s equipped with a vent notch...

RAMS-2001 20ga Drive Cleat Notcher

• Manufacturer: Rams

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.

TK 1655 Notcher (5″x5″, 90 Degree)

A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge Optional Stand $195 Available from a distributor near you. Normally in stock in one of ou...

No. 141 Portable Notcher

Designed for fast, accurate 32″ notch on sheet metal. Hook design of jaws permits notching to exact desired depth without slippage and with minimum effort. Spring-return jaws.

No. 541 90° Hand Notcher w/ 90° Blade & Die

Designed for notching either 90° (No. 541) or 45° (No. 542) up to 20 gauge mild steel with minimal effort. The No. 541 Series notcher is capable of a 1″ depth of notch featuring a built-in metal stop.

AL1-2E

Powered combination of AL1 and AL2 notchers for a perfect & quick 90 degree notch. The AL1-2E is equipped to notch 3/4″, 1″, 1-1/4″, 1-1/2″ and 2″ up to schedule 40 wall thickness. Scotchman pipe notchers make no...

TK Drive Cleat Notcher

This tool notches drive cleats giving drives a rounded end for an easier installation. Notch drive cleats before or after they are formed. Easy to use with a spring loaded push handle. This tool easily mounts to ...

PEXTO PS-66 Notcher

• Manufacturer: Pexto
• Model: PS-66

This machine is hand operated, bench or floor mounted and has adjustable gauge stops, replaceable blades and finger guards. Blades may be mounted for conventional splay cutting, starting at the outside edges, she...