New Horizontal Machining Centers in Germany

PMF-21/26

PMC/PMF-Series featuring a fixed cross-rail is a portal type 5-face machining center for increased productivity with total automatic operation using ATC, AAC and APC to reduce machining lead time and cost. - 5 ph...

PMC-21/26

PMC/PMF-Series featuring a fixed cross-rail is a portal type 5-face machining center for increased productivity with total automatic operation using ATC, AAC and APC to reduce machining lead time and cost. - 5 ph...

Mortar Grinder RM 200

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes, even for samples with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical finen...

Spindle heads with worm gear drives SKU

• Manufacturer: peiseler & KG

SKU SKU series swivel heads with worm gear drives. Select the spindle to be installed according to your machining requirements. We will design the necessary interfaces together with you and the spindle manufactur...

Spindle head with integrated direct drive SKD

• Manufacturer: peiseler & KG

SKD The SKD series is comprised of swivel heads with a direct drive. Select the spindle to be installed according to your machining requirements. We will design the necessary interfaces together with you and the ...

NC subdevice with worm gear drive as a retrofit solution ATC horizontal

• Manufacturer: peiseler

ATC horizontal ATC is the new, compact, high-performance and flexible series from Peiseler. These NC subdevices boast a cutting-edge design and a competitive price. This successful design is based on a complete o...

Spindle head with non-lifting Hirth coupling SKHN

• Manufacturer: peiseler & KG

SKHN In the SKHN series, we use three-part sets of non-lifting, hydraulically actuated Hirth coupling. NC operation is not possible with this technology as the tables are indexing. The SKHN are designed with an a...

FPS 500M-digital

• Manufacturer: FPS Werkzeugmaschinen Warngau

X-axis: 500 mm | Y-axis: 450 mm | Z-axis: 400 mm | Cutting head can also be moved further along the y-axis: 150 mm | W x d x h space: 2600 x 2100 x 2050 mm | Table/clamping surface: 630 x 470 mm | T-grooves numb...

FPS 425M-NC Dualmaster

• Manufacturer: FPS Werkzeugmaschinen Warngau

X-axis: 425 mm | Y-axis: 450 mm | Z-axis: 400 mm | Milling head can also be moved further along the y-axis: 150 mm | W x d x h space: 3250 x 2300 x 2215 mm | Fixed table/clamping surface: 630 x 470 mm | T-groove...

FPS 500M-hydro

• Manufacturer: FPS Werkzeugmaschinen Warngau

X-axis: 500 mm | Y-axis: 400 mm | Z-axis: 400 mm | Cutting head can also be moved further along the y-axis: 150 mm | W x d x h space: 2000 x 2100 x 2010 mm | Table/clamping surface: 800 x 420 mm | T-grooves numb...

FPS 630M-NC

• Manufacturer: FPS Werkzeugmaschinen Warngau

X-axis: 630 mm | Y-axis: 450 mm | Z-axis: 400 mm | Milling head can also be moved further along the y-axis: 150 mm | W x d x h space: 3250 x 2300 x 2215 mm | Fixed table/clamping surface: 800 x 470 mm | T-groove...

Fork head with innovative direct drive SSK

• Manufacturer: peiseler & KG

SSK The two-axis swivel heads of the SSK series offer the highest positioning accuracy and rigidity thanks to a brand-new structural design. The innovative motor concept reliably conducts the waste heat from the ...