Machine Tools » Tuscany

Building Filters

350

New Machine Tools in Tuscany, Italy

C.L.O.M.E.A. PA03
- Manufacturer: C.L.O.M.E.A.
PA03 PVC runner to support the compressed areas (only for mono-run bending).
Scandicci, Italy
C.L.O.M.E.A. PEF
- Manufacturer: C.L.O.M.E.A.
PEF Software and Hardware for the management of the automatic bar-reading encoder and the photoelectric cell determining the length of the initial straight section, very useful for repetitive working cycles. Auto...
Scandicci, Italy
C.L.O.M.E.A. PE filling strips
- Manufacturer: C.L.O.M.E.A.
PE filling strips
Scandicci, Italy
C.L.O.M.E.A. AT0034
- Manufacturer: C.L.O.M.E.A.
AT0034 Roller tightening pneumatic kit.
Scandicci, Italy
C.L.O.M.E.A. RSP
- Manufacturer: C.L.O.M.E.A.
RSP Kit of decimal washers.
Scandicci, Italy
C.L.O.M.E.A. AT0004
- Manufacturer: C.L.O.M.E.A.
AT0004 Manual equipment to drive angle-shaped profiles.
Scandicci, Italy
C.L.O.M.E.A. PA02
- Manufacturer: C.L.O.M.E.A.
PA02 PVC runner to support the stretched winglet (only for mono-run bending).
Scandicci, Italy
C.L.O.M.E.A. AT0003
- Manufacturer: C.L.O.M.E.A.
AT0003 Equipment to correct and calibrate the curves.
Scandicci, Italy
C.L.O.M.E.A. PA01
- Manufacturer: C.L.O.M.E.A.
PA01 PVC runner kit to contain the stretched winglet, including washers for the alignment with the rollers.
Scandicci, Italy
C.L.O.M.E.A. AT0005
- Manufacturer: C.L.O.M.E.A.
AT0005 Equipment to better contain the profile and improve its dragging.
Scandicci, Italy
C.L.O.M.E.A. AT0001
- Manufacturer: C.L.O.M.E.A.
AT0001 Manual lower fourth roller to better contain and drag the profile.
Scandicci, Italy
C.L.O.M.E.A. AT0002
- Manufacturer: C.L.O.M.E.A.
AT0002 Lateral support for bar-reading encoder.
Scandicci, Italy
C.L.O.M.E.A. PIM
- Manufacturer: C.L.O.M.E.A.
PIM Software and Hardware with manual input of the bar-feeding speed, to allow the execution of very short radii and to work on short arcs.
Scandicci, Italy
C.L.O.M.E.A. CRM35
- Manufacturer: C.L.O.M.E.A.
High performance hydraulic bending machine for metal profiles. Machine body in cast iron, gears in hardened steel and three steel driving shafts mounted on conical bearings and controlled by a gearmotor. The mach...
Scandicci, Italy
C.L.O.M.E.A. CR120
- Manufacturer: C.L.O.M.E.A.
High performance hydraulic bending machine for metal and plastic profiles. Machine body in cast iron, gears in hardened steel and three ground tempered steel driving shafts, mounted on conical bearings and contro...
Scandicci, Italy