New Grain Handling in Quebec, Canada

agridry grain spreaders

AgriDry gravity spreaders distribute grain fines without compromising quality. They are gentle on the grain and strong enough to handle fill rates up to 40,000 BPH.

Ncht grain storage

The NCHT series, with a 2.66° corrugation, is designed for applications where routine cleaning is required. The NCHT is a robust hopper silo for wet grain, dry grain, or certain special applications. NCHT conical...

scattergrain grain spreaders

Clever and efficient, the Scattergrain spreader adapts to specific silo diameters with adjustable grain guides and extensions to reach the outer walls. Its unique, flap-controlled central openings facilitate fill...

Gravity-fed grain spreaders

Gravity spreaders are used to distribute dry grain in storage silos. The force of the grain falling against the curved blades of the chute causes a slow and steady rotation that gently disperses the grain – all w...

Fcht grain storage

The FCHT series, with a 4° corrugation, is available with a hopper slope of 45° and is designed to cover a range of "intermediate" capacities, offering the strength and reliability of a reinforced commercial silo...

Truckprobes

• Horsepower: 3 horsepower

InterSystems truck probes provide representative and reproducible samples of grain, pellets, chips, flakes, granules and powders from trucks, railcars, ships, silos and other containers.

Dust-free loading chutes

The CASA loading chute is designed to allow dust-free grain transfer when loading products into trucks or tankers.

Brush screw with pallets

The GSI paddle auger uses flexible rubber paddles to gently and safely unload grain silos. It is available in three different models:

Airconic

• Capacity: 13,500 cubic metre

A unique conical silo aeration system in Casa, flexible and cost-effective for controlling the moisture content of your agricultural products.

ght conical silo

GHT conical grain silos are capable of supporting slightly heavier loads than typical ground-level bulk animal feed tanks. They can be used for temporary storage, are compatible with various grain drying and cond...

Brush screw with chain loop

A direct gear-driven sweeper for use with chain loop systems. This sweeper utilizes many of the same exceptional features and components as GSI's direct gear-driven sweeper.

Direct gear brush screw

The redesigned direct drive brush screws include new center and intermediate well designs, robust gearboxes, a one-piece shield assembly, and a redesigned end wheel.

x series brush screw

No preparation is required in the silo before starting the X-Series sweeper auger – true no-input sweeping. Simply start and monitor operation from the externally mounted control panel and watch your system work ...

Carry in sweeps

Our removable auger provides the versatility to easily move the entire unit from one silo to another. Standard transport bin sweepers are available in 6", 8", and 10" sizes and can be used in silos with diameters...

Leave-in sweeps

Designed for silos up to 105 ft with full floors, GSI's commercial fixed brush auger will accept capacities up to 6,500 BPH.