New Food & Beverage Processing in Łódź, Poland

80BK-A "K" temperature probe

Manufacturer FLUKE Type K temperature probe, with standard banana plug Temperature measurement range -40...260°C Cable length with temperature probe 1m The accuracy of the probe is ±2°, this is due to the type of...

TL-TV20 Test lead; 0,9m; 10A; black and red with crocodile

Measuring cables terminated with a bananek type plug on one side and a crocodile on the other ; 0,9m; 10A; black and red included. Standard equipment of meter types 724, 725, 726. Fluke Silicone Test Leads "stack...

TL-200 Test leads; 25 cm; 10A; black and red with crocodile

Measuring cables terminated with a banana-type plug on one side and a crocodile on the other ; length 0.25m; 10A; black and red included. Used in universal and network meters, short wires reduce resistance and ca...

TL-175E Measuring cables

Manufacturer FLUKE Type of measuring accessories measuring cable Construction of measuring cable angular banana plug 4mm - retractable measuring tip Rated current 10A Cable insulation material silicone. ...

Measuring tips - set red/black

Set of red/black measuring tips, thickness of measuring element 1mm, suitable for standard 4mm banana plug, 1A / 600V, made of stainless steel RoHS

TP74 Test terminal; 10A / 1kV

Measuring pins, set (red, black) Plugs have spring-loaded contacts like banana plugs with nickel-plated brass ends Safety category CAT II 1000 V, 10 A Category CAT III 1000 V only with protection cap

TL-932 Fluke, Test lead; 0.9m; 15A; black and red

• Manufacturer: Fluke

Measuring cable terminated on two sides with banana plugs ; 0,9m; 15A; black and red included

TL-175 Measuring cables

Manufacturer FLUKE Type of measuring accessories measuring cable Construction of measuring cable angular banana plug 4mm - retractable measuring tip Rated current 10A Cable insulation material silicone. ...

TL-224 Silicone test leads

TL224 Test leads, shielded ends ( straight and angle) banana, CAT III 1000 V, CAT IV 600 V

80TK, temperature measurement module

Module compatible with any multimeter having an input impedance of 10MΩ or greater and a DC voltage range of mV. Allows you to turn any Fluke multimeter into a thermometer via a standard banana connector. Allows ...

1296, Adapter 500V, BNC socket - 2 x 4mm banana socket

Pomona 1296 Female Banana Socket to BNC Allows the transition from the oscilloscope BNC connector to a banana jack which allows standard test leads.

BP880, Adapter 500V, BNC socket - 2x 4mm banana plug

BP880 Banana to BNC Adapter Allows you to switch from the BNC oscilloscope connector to a banana pin which allows you to connect a shielded cable to a digital meter, commonly used on Fluke 80i-110s.

TL-75 measuring cable

Manufacturer FLUKE Type of measuring accessories measuring cable Construction of measuring cable angular banana plug 4mm - retractable measuring tip Rated current 10A Cable insulation material silicone. ...

TL 75-1 Test leads

Manufacturer FLUKE Type of measuring accessories- measuring cable Construction of the measuring cable, 4mm angle banana plug. Rated current 10A Cable insulation material silicone. ...

Measuring cable BNC/ banana plug

The cable enables connection between a banana plug and test instruments with BNC-type sockets, very useful during frequency measurements with multimeters of the series. 8845, 8846A , 34401A The BNC connector and ...