Machine Tools » Bending & Forming » Roll/Plate Bending & Forming » Bavaria

Building Filters

140

Used Roll/Plate Bending & Forming in Bavaria, Germany

  • 1998 round bending machine Coil-Tec

    1998 round bending machine Coil-Tec SM

    • Manufacturer: Coil-Tec

    Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.

    Hohenbrunn, Germany
  • 1998 round bending machine Schwartmanns

    1998 round bending machine Schwartmanns WSRV 03.2

    • Manufacturer: Schwartmanns

    used Schwartmanns 3-roll round bending machine, with wire forming grooves, folding groove and swiveling upper glove, rear roller adjustable via the rack, machine repaired by a specialist, tested, cleaned and then...

    Hohenbrunn, Germany
  • Fasti 125-10/1.5 round bending machine

    Fasti 125-10/1.5 round bending machine

    • Manufacturer: Fasti

    Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...

    Hohenbrunn, Germany
  • 1987 Biegemaster BMTH long bending

    1987 Biegemaster BMTH long bending machine

    • Manufacturer: Biegemaster

    The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...

    Hohenbrunn, Germany
  • 2017 Schröder AKV swivel bending

    2017 Schröder AKV swivel bending machine

    • Manufacturer: Schroeder

    Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...

    Hohenbrunn, Germany
  • 1981 Swivel bending machine RAS

    1981 Swivel bending machine RAS 64.25

    • Manufacturer: RAS

    Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...

    Hohenbrunn, Germany
  • 2002 Long bending machine Thalmann

    2002 Long bending machine Thalmann Pico 150-6.2

    • Manufacturer: Thalmann
    • Power requirement: 3 kilowatt

    Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...

    Hohenbrunn, Germany
  • 1991 Jorns SuperLine-300-SO-CNC-6 long bending

    1991 Jorns SuperLine-300-SO-CNC-6 long bending machine

    • Manufacturer: Jorns

    Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...

    Hohenbrunn, Germany
  • 2000 long bending machine Jorns

    2000 long bending machine Jorns ML200-SO-CNC400A-4

    • Manufacturer: Jorns

    Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...

    Hohenbrunn, Germany
  • 2003 Long bending machine Jorns

    2003 Long bending machine Jorns NL125-SM-OP 2100/2-4

    • Manufacturer: Jorns

    Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...

    Hohenbrunn, Germany
  • 1992 Long bending machine Jorns

    1992 Long bending machine Jorns NL125-SM-OP 6x1.25

    • Manufacturer: Jorns

    Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...

    Hohenbrunn, Germany
  • 1991 Long bending machine Jorns

    1991 Long bending machine Jorns NL 125-SM-OP/9 6x1.25

    • Manufacturer: Jorns

    Used hydraulic Jorns press brake, motorized shear, foot switch, retractable sheet metal supports, control unit on the swivel arm. The machine will be professionally repaired, inspected, and cleaned, and will the...

    Hohenbrunn, Germany
  • 2014 Long bending machine Jorns

    2014 Long bending machine Jorns SL-300S-1250-RH-OV-DP-CP200

    • Manufacturer: Jorns

    Used Jorns swing-bending machine with the following features: • Reinforced version with additional stand unit • Deep draw with motorized depth stop system 1250mm, with 4 stop fingers • CNC touch graphics control ...

    Hohenbrunn, Germany
  • 1998 Long bending machine Jorns

    1998 Long bending machine Jorns NL100-SM CNC400 6x1.25

    • Manufacturer: Jorns

    Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...

    Hohenbrunn, Germany
  • 1998 Jorns NL125-SM-CNC400A-6x1.25 long bending

    1998 Jorns NL125-SM-CNC400A-6x1.25 long bending machine

    • Manufacturer: Jorns

    used hydraulic Jorns swivel-bending machine, with hydraulic roller shear SM 1.5 and depth stop (4 stop fingers), with emergency stop rail, rearwardable sheet supports and control on the swivel arm, machine was re...

    Hohenbrunn, Germany
34567

Overview

Roll/Plate Bending & Forming machines are essential for shaping metal sheets and plates into curved forms. These machines are widely used in industries like manufacturing, construction, and shipbuilding. They come in various sizes and capacities, capable of handling different thicknesses and types of metal, making them highly versatile for various bending and forming needs.

FAQ

What factors should I consider when purchasing a roll/plate bending & forming machine?

Consider the machine's capacity, the maximum thickness and width it can handle, the type of metal you will be working with, and whether you need manual, hydraulic, or CNC control.

How can I ensure my roll/plate bending machine is shipped safely?

Use a professional machinery transport service. Ensure the machine is adequately secured and protected from potential damage during transit, and check for any shipping or import regulations.

What are the maintenance requirements for roll/plate bending & forming machines?

Regular maintenance includes lubricating moving parts, checking hydraulic fluids, inspecting for wear and tear, and ensuring all electrical components are functioning correctly. Refer to the manufacturer's manual for specific maintenance schedules.