New Bending & Forming in Massachusetts, USA

CMS (OCTA) Ring Machine

• Manufacturer: CMS (OCTA)

The Ring machine (RA) is used to insert the rings of brazing material at the ends of the bends at 180° in order to use them for processes of automated brazing. The ring machine operates pneumatically but it may b...

TK No. 24 Collar Maker

Capacity: 24-30 Gauge Speed: 30ft./minute Notch,bead,crimp and roll complete round starting collars, 3″ to 14″ in diameter out of 24 to 30 gauge galvanized – in seconds, not minutes and with only one pass! Just c...

TK Hem & Kick Roll Former

• Manufacturer: Tin Knocker

This machine is standard equipped with no tooling in the center position and (2) sets of outboard shafts equipped with; ½” x 180-degree hem rolls for 20-26ga (right side) ½ Hem with 5/8” Kick Rolls (left side) See .

TK 20 Ga. Pitts. (With Choice of Drive Cleat or Acme Rolls)

• Manufacturer: Acme

. This 5 station 20 Gauge Pittsburgh lock roll former is offered with choice of Drive Cleat or Acme Rolls on the other outboard side. Powered by a 1 HP motor with V-belt drive, this machine is built for dependab...

TK 20 Ga. Button Lock (230/3 Phase) (3 HP)

(Also known as “Button Punch Snap Lock” Tin Knocker’s 9 Station Button Lock Roll Former means no hammering over of edges and fast duct assembly. 220/3/60 Electrics, standard. Comes with “male” tooling on one sid...

RAMS-2014 Auxiliary Machine

• Manufacturer: Rams

Rams-2014: 20-28 Gauge Mild Steel

RAMS-2013 S & Drive Machine

• Manufacturer: Rams

The unit comes with a 3 HP electric motor, 208-230V single phase .We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green...

RAMS-2007-AA Auto Guide 20ga Stand Alone Power Flanger

• Manufacturer: Rams

​model: ​Capacity | ​rams-2007-aa: ​20-24 Gauge Mild Steel

RAMS 2060-DB 60″ 20 Gauge Duct Beader

• Manufacturer: Rams

No. 0585 Beading & Crimping Machine

The Pexto No. 0585 Beading & Crimping Machine includes Ogee bead and crimping rolls to provide one pass combined crimping and beading. They are adjustable for deep or shallow beading and for “fade-away” crimping....

Flagler 18 Power Flanger Machine

• Manufacturer: Flagler

Ideal for larger fitting work. This machine is built with a heavy duty cast iron gear housing with oil bath. 1/4″ Approx. 18 feet per minute. 1/2 HP 115/1/60/1800 RPM . Vee Belt. Arc Welded Steel. heavy Top Plat...

CR8-SDC Rollformer

• Manufacturer: SDC

Ductformer’s CR8-SDC Rollformer has both versatility and flexibility. Altogether the Multiple Roll Tooling configurations that are available on the CR8 including Slip and Drive Cleats, Male and Female Snap-Lock, ...

Duct Line 2 cradles "New" 5ftx 18ga mild steel with Duct notching,Beading,Shearing and Folding

• Manufacturer: Byfo

2)Standard Features: 1. Auto Duct line III consists of a decoiler （2 units frames）60" Duct work 2. Leveling & grooving rollers 3. hydraulic notching & punching device and dies 4 units. 4. hydraulic shearer and hy...

3/4 Hp EURODRIVE FLANGE MOUNT GEAR REDUCER 40 rpm #B-4278

(3) 3/4 Hp EURODRIVE FLANGE MOUNT GEAR REDUCER 40 rpm 3/4 Hp, 1700 rpm, 230/460 volt, 2.90/1.45 amps 42.87-1 ratio, 40 rpm output to 1.25 inch diameter stub shaft 4 bolt flange mount POSSIBLY UNUSED (3) available

RAMS-2008-AA-G 20ga Auto Adjust Power Flanger Attachment

• Manufacturer: Rams

The unit can be mounted to the RAMS 2006 Pittsburgh Machine. The RAMS-2008-AA-G Power Flanger will form a 7/32″ right angle flange on either straight or curved pieces. It has an “auto-guide”, which will automatic...