Used Processing in British Columbia, Canada

60" CAE Carriage

• Manufacturer: CAE

- Manufactured approximately 1988 - 3 Knee c/w Sharpe linear positioners - Vee and flat wheels - Cant flippers - Overall knee width 21" (14" between the knee faces) - Two (2) accumulators - Frame is approximately...

30 Unit Truck Bins (3 only)

• Manufacturer: Canadian Mill Equipment

- Three (3) only 30 unit bins c/w hydraulically actuated bin bottoms - Support steel - Two (2) hydraulic power units - Dismantled and ready to load

COMACT DDM6 PROFILING CANTERLINE

• Manufacturer: Comact

- Built in 2006 - 4" to 10" diameter logs, 8 feet long @ up to 650FPM - Comact Wave Feeder (9' - 6" between end walls) - V flight Infeed Conveyor c/w eletric drive - V flight scan chain c/w electric drive - Quad ...

2010 16" 1480psi Sweet Vertical Separator Phase

Packager: Flint | Service type: Sweet | Pasc condition rating: A | Condition details: New, never in service | Skidded: Yes | Housed: Yes | Connection status: Disconnected | Vessel only: No | Diameter: 16" | Diam...

2 Saw Valley Trimmer

• Manufacturer: Valley

- 8' to 20' lug loader - Lugged transfer deck - Near end trim saw - Cross over rollcase - Valley push back roll - Far end trim saw - Still installed

MPM Scanner System - Two (2) Systems

• Manufacturer: MPM

- Originally designed for log sorting - Two (2) Hermary Opto combination scanners - Two (2) scanner frames - Two (2) scanner interface panels - Two (2) computers - Two (2) PLC cabinets (Modicon) Not Included: - ...

Sharp Chain Reducer Twin Bandmill System

• Manufacturer: Sharp

- To handle logs up to 18" in diameter x 20 feet long - VK log singulator - Sprocket style log turner c/w centering arms and overhead holddown rolls - 3" wide Sharp Chain c/w hydraulic drive - USNR reducer module...

Tanguay Model 460 Grapple Loader

• Manufacturer: Tanguay

Tanguay Model 460 Grapple Loader - Pedestal mounted on a side shift rail - Electric/hydraulically operated - Operator's cab and controls - Dismantled and ready to load onto trucks

Optimatic (Simonds) Model KRO970 Vertical Circle Saw Leveler

• Manufacturer: Optimatic (Simonds)

- Built in 2005 - Model KRO970 - 150mm min. diameter, 810mm maximum saw diameter - 1mm to 4mm flat thickness - Suitable for splined and slotted saw blades - 1155 hours - 480/3/60 - Dismantled and stored in a buil...

Hanchett Circular Saw Sharpener

• Manufacturer: Hanchett

- Model 724 - Serial #7731 - Good condition

84" SWING SAW - TWO (2) AVAILABLE

• Manufacturer: Canadian Mill Equipment

- 84" swing saw c/w 100 HP drive motor, 460/3/60 - Fabricated support frame - Hydraulic cylinder activated (no HPU) - Two (2) saw blades - Dismantled ready to load

Wood Fired Industrial Steam Plant

- Built in 1996, shut down in 2004 - Boiler capacity of 80,000 lbs/hour of steam at 450 psi - Could be retrofitted to cogeneration to produce 5 to 7 mega watts - Designed to burn hog fuel (estimated consumption u...

Kewanee Chip Trailer Dump

• Manufacturer: Kewanee

- 1989 model - 75 ft long deck - Chip pit - Chip conveyor, four (4) strand WD120 chain c/w 100 HP electric drive (approx 50' long) Holds 1 to 1-1/2 truck loads

Scalping Roll Disc Screen

- Eleven (11) rolls, approx. 4' wide x 11'-6" long c/w main frame - No drive

25" x 25" Archer Chip Feeder

• Manufacturer: Archer

- 15-1/2" x 21" opening - Name plate says 25 x 25 -Year 1968 - Good condition - No drive