New in Netherlands

Trusted Seller
Martin T32
- Manufacturer: Martin
Working width: 530mmm | Thickness: 3 - 250mm | Feed speed: 2 speed; 6 & 12 m/min change of speed during production possible | Max planning dept: 8 mm | Infeed table length: 1.215 mm | Outfeed table length: 1.035...
Enter, Netherlands
Trusted Seller
Graule ZS170 (N)
- Manufacturer: Graule
- Model: ZS170N
Machine base for ZS 170 (N) 3 KW motor instead of 2 KW Adjustable back stop for sharp corners Handwheel for tilting to 2 sides (45 - 90 - 60 degrees) Hydraulic brake cylinder for saw stroke Pneumatic material cla...
Enter, Netherlands
Trusted Seller
Martin T66 - 2-axis control and parallelogram table
- Manufacturer: Martin
Martin T66 - 46° tilting and Parallelogram table with 2-point digital cross-cut length measuring
Enter, Netherlands
Trusted Seller
2024 Martin T66 - 3-axis control, scorer and parallelogram table
- Manufacturer: Martin
Martin T66 - 3-ax control, 2-ax scoring saw; 46° tilting and Parallelogram table; 2-point digital cross-cut length measuring
Enter, Netherlands
Trusted Seller
2024 Martin T77 PreX-edition 2 46° and Radio Compens
- Manufacturer: Martin
Martin T77PreX (2*46° tilting) and length compensation when angular cuts (via Bluetooth)
Enter, Netherlands
Trusted Seller
2024 Martin T77 - 3-axis control and Radio Compens
- Manufacturer: Martin
Martin T77PreX - 3-axis control, RadioCompens (automatic length correction, when angular cuts via Bluetoouth signal)
Enter, Netherlands
Trusted Seller
Martin T54
- Manufacturer: Martin
- Model: T54
Working width: 500 mm | Chip removal: Max. 8 mm | Infeed table: 1.640 mm | Outfeed table: 1.200 mm | Table height: 850 mm | Rpm: 5,000 rpm | Cutter-block: Standard TERSA solid steel Z = 2, Ø 125mm | On-off butto...
Enter, Netherlands
Trusted Seller
Martin T45
- Manufacturer: Martin
- Model: T45
Planing width: 630mm, | Plane height: 2.8 - 300mm, | Weight: 1,350 to 1,600 KG | Speed of the chisel axis: 5,000 rpm | Chisel shaft: Ø 125mm Tersa Z-4 solid steel shaft | Table length: 1.260mm | Maximum chip rem...
Enter, Netherlands
Trusted Seller
Martin T66
- Manufacturer: Martin
MARTIN Format Circular Saw T66Technical Data: Saw height & tilt electronically controlled with digital measurement display Also the movement of the motorized axes in Hold Mode (movement of the axes via push butto...
Enter, Netherlands
Trusted Seller
Martin T77
- Manufacturer: Martin
Martin T77 Panel Saw Technical Data: Control System Technical Features: ConnectControl is the overarching term for the control concept used in Martin's latest generation of panel saws and milling machines, patent...
Enter, Netherlands
Trusted Seller
Graule ZS170 (N)
- Manufacturer: Graule
- Model: ZS170N
Machine stand for ZS 170 (N) Power 3 KW instead of standard 2 KW Adjuustable rear fence for sharp angles Handwheel for tilting both sides (45° - 90° - 60°)
Enter, Netherlands
Trusted Seller
Graule ZS135 (N)
- Manufacturer: Graule
- Model: ZS135N
Adjustable fence for sharp angles Handwheel - tilting to 2 sides (45 - 90 - 60 degrees)
Enter, Netherlands
Trusted Seller
Martin T12
- Manufacturer: Martin
- Model: T12
* With automatic positioning of the controlled axes, the milling spindle is moved in a light, forceless rotation (approx. 100 rpm.) moved. This allows the electronics to recognize a possible upcoming collision an...
Enter, Netherlands
Trusted Seller
Tiger Stop TM
- Manufacturer: TigerStop
Tigerstop Pusher system/Length stopper system Tigerstop: Left 6.8 | Working length: 6.85 meters (net) | Hardened aluminum profile: 100*100 mm | Voltage: 220 Volt - 50 Hz | Engine: 0.6 KW | Dive: Servo-drive | Mov...
Enter, Netherlands
Trusted Seller
Sawgear
- Manufacturer: TigerStop
Sawgear: SawGear is an easily transportable length stop that replaces manual stops for setting lengths and complex miter cuts. Using the SawGear immediately increases your productivity and accuracy while drastica...
Enter, Netherlands