Used l/c in Belgium

AIR CHOC 50 l

Type: 0501030A, serial number: 050 Weight: 48 kg | External dimensions: 870 mm x 800 mm, Ø 300 mm | Performance pressure: max. 12 bar | Minimum temperature: - 20°C | Maximum temperature: + 120 °C | Air pipe exit:...

Sand conveyor KLEIN 200 l

• Manufacturer: Klein

Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

1972 Sand conveyor 200 l, KLEIN

• Manufacturer: Klein

With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C

Dust conveyor 150 l, KLEIN, type A15O

• Manufacturer: Klein

Year of construction: 1968, serial number: 058 For 100°C - 8 atmospheres With 2 sondes - is complete except one sonde SP overtaken = with switch cabinet Dust feeder

1972 Pneumatic sand transport 250 l, RONOT

Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...

1995 Pneumatic dust conveyor BOGGI+LEGNANI 50 l

• Manufacturer: Legnani

Serial number: 74057, construction year: 1995, weight: ± 100 kg Ø 470mm Operating pressure 8 bar With one pneumatic clap Input sand Ø 150mm Temperature 200°C Capacity 50 l Is adapted to silo S3104 of 19m³ Appropr...

1990 Pneumatic sand conveyor KLEIN, 75 l

• Manufacturer: Klein

Construction year: 1990, weight: 150 kg With measuring head full-empty max. temp.200 C°

2006 Sand conveyor, capacity 150 l, WÖHR, CE certificate

• Manufacturer: Wöhr

Type: SGTF 150, serial number: 371360 Construction year: 2006, weight: ± 220 kg With cone on the input (pneumatic) With valve With pneumatic control

2000 Core shooter LAEMPE LB25 and mixer LAEMPE SM7

• Manufacturer: Laempe / Röperwerk

Corebox measurements and weights Maximum gassing area with gassing manifold (alu): 580mm x 700mm Optional: gassing area with gassing hood and integrated cope eject plate: 550mm x 630mm Optional: shoot head, shoot...

1997 Gassing unit LAEMPE, 4,5 kW, with preheater

• Manufacturer: Laempe / Röperwerk

With indication of operating pressure, pushing pressure and operating pressure of the valves This unit is also equipped with a preheater and can treat cores up to ± 250 l

Cooling generator AXIMA

Type: FKSL 15 Serial number: 49.0024599 Construction year: 2005 Weight: 610 kg Dimensions: length 2250 mm, width 950 mm, height 2200 mm Engine: 25 kW, 400 V, 50 Hz Cold water inlet: 21° C Cold water outlet: 15° C...

Hot-Box shell moulding machine SHALCO U150

SHELL-CORE machine SHALCO U150 hot-box plate Year of construction: 1982, in very good condition, weight: 800 kg Heating board gas 380 mm x 380 mm, 150 cycles (7 s/h) Heating adjustable 38 to 370 °C, 80000 kcal/h...