Used process engineering in Belgium

1997 Fixed gas melting furnace for aluminum THERMCO

• Manufacturer: Thermco Systems

Melting area dimensions: Length: 2450mm; Width: 1300mm; Height: ±2200mm With charging skip 2 outlet chutes with with plug system Telemecanique control With CE mark

Alu melting furnace, gas, tiltable, 315 kg, MORGAN

• Manufacturer: Morgan

With burner ELCO, type EK3.60 G-ZVA20 With hydraulic unit, gas pressure regulator for natural gas With podium and stair, temperature sensor With crucible type BU350

Alu melting furnace Morgan tiltable ±700 kg natural gas

• Manufacturer: Morgan

Exterior dimensions: Width: 2320mm; Depth: 1850mm; Height: 2020mm Dimensions platform: Width: 2700mm; Depth: 2350mm; Height: 2400mm with keeping level with new lining with charging platform and stairs wit natural...

Alu melting furnace tiltable MORGAN, ± 600 kg, gas heated

• Manufacturer: Morgan

Engine brand ALMO, 2,2 kW; 1435 rpm; 230/ 400 V Gas burner ELCO, type EK 3.60 G-ZWA20 200 - 600 kW; 20 - 70 m³/h of natural gas With stairs With control box With hydraulic unit With crucible Ø 670 mm, height 900 mm

Alu melting furnace STRIKO, gas fired, content 1000 kg

• Manufacturer: Striko

Furnace for natural gas with 2 burners for melting chamber and 1 for holding and casting chamber With hydraulic tilting, with loading skip, with control box, with chimney With gas installation KROMSCHRÖDER Conten...

2001 Electric treatment furnace PADELTHERM 650°C gas

• Manufacturer: Padelttherm

Heated with natural gas CE mark on the oven Weight: 5100 kg | Electrical voltage: 400V /50Hz/ 107,5A | Control voltage: 230V | Power: 72kW | Max temperature: 650°C

1963 Fixed melting furnace FULMINA, natural gas, 300 kg

With natural gas burner JUNKER and command LANDIS GYR, type: LFL1.635 With crucible A300

2000 Fixed holding and melting furnace, gas, for 150 kg aluminium, METAFOUR

Type: GN60AL GD, serial numbers: 1218/19/20 & 21 Construction year: 2000, weight: 1500 kg Inside Ø crucible: on top 450 mm, below 420 mm, type BU 150, support Ø 300 mm With temperature probe and control system Wi...

2000 Fixed holding and melting furnace, gas, for 200 kg aluminium, METAFOUR

Type: GN70AL GD, serial numbers: 1221 Construction year: 2000, weight: 1500 kg Inside Ø crucible: on top 450 mm, below 420 mm, type BU 200, support Ø 300 mm With temperature probe and control system With atmosphe...

1998 Alu melting furnace tiltable, 315 kg, MORGAN, natural gas

• Manufacturer: Morgan

Motor ALMA, 2,2 kW, 220/380 V With hydraulic unit With gas pressure regulator and gas burner ELCO type EK3.60 G-ZVA 20 With podium and stair ,with temperature sensor Max. thermal output 500 kW With crucible type ...

2016 Melting and warm holding furnace STRIKO, 3000 kg, gas heated

• Manufacturer: STRIKO

With electric control SIEMENS TIA Portal With loadiung skip

Alu melting furnace tiltable, 300 kg, gas-heated, MORGAN THERMIC

• Manufacturer: Morgan

With control board With podium Hydraulic unit and blower for burner 350 kW With cover New crucible With temerature probe in the crucible

Gas heated annealing furnace CFI, 950 °C, 3600 mm x 1500 mm x 1410 mm

With two mobile hearth bogies and two charging doors 33 kW, 220 V, 88 A Doors activated via pneumatic pistons Fiber isolation renewed 6 months before closure

1990 Tilting crucible furnace HINDENLANG, aluminium, gaz heated, 800 kg

• Manufacturer: Hindenlang

Tiltable furnace HINDENLANG, melting and warm holding Electric control board With stage and extractor hood With exhaust gas stack

Vibrator for furnaces and ladles f. side-lining

220/380 V, 2,6/1,5 A 3 vibration engines BOSCH With cylinder and pneumatic control by hand Opening Ø 1100 mm - 1600 mm