Used process engineering

2015 ROYAL A-20 HAUL MASTER

• Manufacturer: Royal

Royal A-20 Haul Master Crucible Hauler 2015 Royal A-20 Haul Master Crucible Hauler, 30,000 lb Capacity, Cummins 6-Cylinder Diesel Engine EQUIPPED WITH: Cummins 6-Cylinder Diesel Engine

Warren Cast Iron Globe Valve – 3″

• Manufacturer: Warren

Warren Valve’s line of Cast Carbon Steel Globe Valves are an economical and quality choice for oil and gas refineries as well as petrochemical plants. Features: Fully rebuildable Proven Design (2) Valves availabl...

ATHENA KN16 Boiler Facility Heat Exchanger Efficient 1,600,000 Btu Cast Iron

• Manufacturer: ATHENA

Product Information table { border-collapse: collapse; width: 100%; } th, td { ...

1994 Sand conveyor ECO-ENGINEERING, 300 l

Construction year: 1994, weight: ± 400 kg With control, sensors, shutter with pneumatic ventil and emergency stop

Gas radiant heater, natural gas

Collector length 375 mm, width 280 mm With pressure regulation

Multi gas detector DRÄGER

• Manufacturer: Dräger

With operating instructions for toxic and physiologic indications for gas and steams Concentration indications with original DRÄGER tubes

Small generating set BOSCH, petrol

• Manufacturer: Bosch

Type : G4700, serial number : 7790406020 Motor BOSCH, 3,9/3,7 kW, 230/400 V Mounted on a mobile trolley With petrol motor Briggs and Straton

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

Exhaust gas loss calculator DAVILOR TECH

In plastic box Weight: ± 8kg

1972 Swinging shell moulding machine SHALCO, gas

Type: SCB9 FB, Serial number : 1133 B0106800 65 593 In good condition Gas heating Electro-pneumatic command, with conveyor belt for the cores The cores fall on the conveyor and are checked out by pneumatic eject...

Ladle heater IPROS, 400 kW, natural gas

400 kW, 220 V, 50 Hz With valves LANDIS & GY Capacity 400 kW, ventilator 2,2 kW, 220/380 V, 2850 rpm With burner mounted on foot

Hot-box shell moulding machine PGM, gas

Surface of the heating plates 510 x 660 mm Hydrauliccaly tiltable In good condition

Special hose for amine gas, Ø 38 mm

Ø 38 mm x 54 mm; norm 6134/2005 For gassing unit wiht heating 16 kW

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

Gas heating plate, 750 mm x 350 mm

With 46 warm ramps, length 350 mm, With command panel, regulator, night light, security In good working condition