Used Granulators & Pelletizers in Illinois, USA

GETECHA SRS100 A2 LAB GRANULATOR 12432

• Manufacturer: Getecha

Getecha model SRS100 A2 laboratory granulator, S/N 15339.6. 60mm x 80mm (2.362″ x 3.149″) feed throat, 100mm (3.937″) cutting diameter and length 4.5mm round and angled perforation screen. 220 RPM rotor speed pow...

PALLMAN PS6-6 RUBBER GRANULATOR 17877

• Manufacturer: Pallmann

Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rat...

NELMOR G810LS LOW SPEED GRANULATOR 16117

• Manufacturer: Nelmor

Nelmor model G810LS, low speed granulator, S/N 8904-28845. 8″ x 10″ feed throat, chain and sprocket driven 3 knife solid rotor, hard faced cutting chamber, 1HP 230/460V motor with a gearbox. Insulated top robot/h...

NELMOR G810LS LOW SPEED GRANULATOR 18777

• Manufacturer: Nelmor

Nelmor model G810LS low speed granulator. S/N 00L04331. 8″ x 10″ feed throat. 3 knife solid rotor with 2 bed knives. Rotor powered by a 3 HP (2.2 Kw) 460-volt motor via gearbox and chain & sprocket drive system. ...

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...

NELMOR G810M1 GRANULATOR WITH PROFILE 16628

• Manufacturer: Nelmor

Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute b...

NELMOR G1012M1 GRANULATOR WITH FEED 5602

• Manufacturer: Nelmor

Nelmor model G1012M1 granulator. S/N 7908-13725. 10″ x 12″ feed throat. 3 knife open rotor, 2 bed knife. 10HP 230/460V motor. 3/4HP side mounted blower discharge with 4″ OD outlet. 9″ wide front mounted knurled s...

CONAIR CG1424 (RAPID R24) GRANULATOR 12486

• Manufacturer: Conair

Conair model CG1424 granulator (Rapid R24), S/N 410.105. 14″ x 24″ feed throat, 3 knife open rotor, 2 bed knife, tangential cutting chamber. 25HP 230/460V motor. Dual fly-wheel insulated tray feed hopper with 17″...

NELMOR G1436MB SHEET FEED GRANULATOR 16953

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right ...

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...