Used Drilling Rigs in New York, USA

WALKER NEER 250-40 DRILL RIG PACKAGE #1042Ta
- Manufacturer: Walker
Top head Drive drill rig, Cat 3406 (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rat...
$420,000 USD
Get financing
Est. $7,904/mo
Oceanside, NY
1980 FAILING CF15 DRILL RIG #3525Ta
- Manufacturer: Failing
- Model: CF15
Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T3...
$125,000 USD
Get financing
Est. $2,353/mo
Oceanside, NY
1973 PORTADRILL 10TK DRILL RIG #2279Ta
- Manufacturer: Portadrill
Manufactured 1973, retrofitted to 60,000#, 20’ Kelly, 35’ derrick, 19D rotary table retractable (sets up to 20” casing), no air (compressor removed but PTO is there), no mud pump, Detroit diesel deck engine, m...
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
ATLAS COPCO/INGERSOLL RAND T4 DRILL RIG #10189Ta
- Manufacturer: Atlas-Copco
Year 2006, 1250/350 IR HR2.5, approx. 4,000 hours, Cummins QSK19 (750HP) diesel deck engine, 50,000lbs pullback, spur gear tophead, Mounted on 8x4 CCC with Cummins ISM (370 HP) diesel engine Price: $440,000
$440,000 USD
Get financing
Est. $8,281/mo
Oceanside, NY
GARDNER DENVER 15W DRILL RIG #8644Ta
- Manufacturer: Gardner Denver
Handles Range 2 pipe, 60’ mast (was extended 10’), 10” table, 5 x 6 mud pump, air clutches, mounted on 1964 GMC White tandem axle truck with GMC engine, PTO, leveling jacks, 2nd owner rig Price: $90,000 GA...
$90,000 USD
Get financing
Est. $1,694/mo
Oceanside, NY
CHICAGO PNEUMATIC T7000 DRILL RIG #9786T
- Manufacturer: Chicago Pneumatic
Manufactured 1976, 825/300 GHH 2-stage air compressor, 34’ derrick with 28’ stroke, Cat 3406 diesel deck engine, mounted on Paystar 5000 tandem axle truck with diesel engine, 5 pod barrel loader carousel for 5...
$140,000 USD
Get financing
Est. $2,635/mo
Oceanside, NY
1983 SPEEDSTAR SS1000 DRILL RIG #3669T
Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000 NATIONAL DRAWWORKS SINGLE DRUM ROTARY DRILL RIG
$70,000 USD
Get financing
Est. $1,317/mo
Oceanside, NY
1975 PORTADRILL 524 DRILL RIG #374T
- Manufacturer: Portadrill
Manufactured 1975, mounted on 1975 International truck, 5 x 6 mud pump, Atlas Copco DF2 air compressor, Cat 3208 engine, 8” retractable table, working condition Price: $65,000 PORTADRILL 524 DRILL RIG PACKAGE
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
2025 HARDAB 5K6 TOP HEAD REVERSE CIRCULATION DRILL RIG #9085T
Manufactured 2025, Patented pipe handling system with 660 ft. drill pipe on board, 2-speed top head (70,000 lbs-in torque), mounted on rubberize steel tracks, 7'5'' width, Deutz (74 hp) diesel engine, 30’4” m...
Oceanside, NY
1987 FAILING F10 DRILL RIG #10684T
- Manufacturer: Failing
- Model: F10
Auger drilling, high speed rock coring, conventional mud/air rotary drilling. Rig manufactured 1987, mounted on 2015 Mack Truck CXU613 with 13L diesel engine, approx 540,000 miles, Eaton 10 speed manual trans...
$109,500 USD
Get financing
Est. $2,061/mo
Oceanside, NY
1972 PORTADRILL 12TK DRILL RIG #3369Ta
- Manufacturer: Portadrill
Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ ...
$93,500 USD
Get financing
Est. $1,760/mo
Oceanside, NY
1989 TEXOMA 700 DRILL RIG #2594T
- Manufacturer: Texoma
- Model: 700
Manufactured 1989, repowered with John Deere diesel deck engine, mounted on 1997 Mack DMM 6x6 truck with Mack diesel engine, stored inside, ready to work Price: $90,000
$90,000 USD
Get financing
Est. $1,694/mo
Oceanside, NY
HUTTE HBR 605 DRILL RIG #10185Tc
Built 2019, HB48 rotary Price: $375,000 CDN
Oceanside, NY
WILSON 42 WORKOVER/DRILLING RIG #4044Ta
- Manufacturer: Wilson
Rebuilt 2010, double/triple, 8V92 Detroit with Turbo charger and after cooler, trailer mounted, single drum drawworks, Allison transmission 588 Series, 102’ x 225,000# derrick, gooseneck 3 axle trailer 7’ subs...
$140,000 USD
Get financing
Est. $2,635/mo
Oceanside, NY
1969 FAILING 1500 DRILL RIG #9268Tb
- Manufacturer: Failing
- Model: 1500
Manufactured 1969, Reworked in 1985, mounted on 1989 International tandem truck with DT466 diesel engine, friction clutches, 40’ mast, double drum, 5 x 6 mud pump, 300’ drill rod Price: $64,500
$64,500 USD
Get financing
Est. $1,214/mo
Oceanside, NY
Schramm T64HB Drilling Rig
- Manufacturer: Schramm
- Model: T64HB
Good condition Schramm T64HB Drilling Rigs manufactured in 1978. Located in USA and other countries. Click request price for more information.
USA