Used Okuma CADET Cnc Lathes

1997 Okuma CADET LNC8

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

CNC Turning Center Control: Okuma OSP 700L | Bar capacity: 2.5" | Chuck size: 10" | Max swing over bed: 15.75" | Max turning diameter: 9.84" | Max work length: 15" | X axis travel / z axis travel: 6.89" / 20.47" ...

1996 Okuma CADET-L1420

• Manufacturer: Okuma
• Model: CADET L1420

CNC Turning Center -EQUIPPED WITH- 12" Hydraulic Chuck Chip Conveyor Fully Programmable Tailstock

1996 Okuma CADET LNC10

• Manufacturer: Okuma
• Model: CADET LNC10
• Spindle bore: 80.01 mm

CNC Turning Center -EQUIPPED WITH- Tailstock 10" 3-Jaw Chuck Chip Conveyor 2.59" Thru Draw Tube

1992 Okuma CADET LNC8

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

CNC Turning Center Control: OSP5020 | Swing over bed: 21.65" | Swing over cross slide: 15.75" | Max turning diameter: 9.84" | Max turning length: 20.47" | Spindle nose: A2-6 | Spindle bore: 1.8" | Spindle speeds:...

1991 Okuma CADET LNC8

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

CNC Turning Center -EQUIPPED WITH- #5 Morse Tailstock 8" 3-Jaw MMK Power Chuck HENNIG Chip Conveyor

TOBISHI FAN 6550G1LF22-0T1 OT1 OKUMA CADET LNC8 CNC LATHE

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

OKUMA CADET LNC8 CNC LATHE HA-E0105-653-800-134 OPERATING PANEL OSP5020L MONITOR

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

1994 OKUMA CADET LNC8 PALLET 250315 51

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

1994 OKUMA CADET LNC8 PALLET 250315 44

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

1994 OKUMA CADET LNC8 PALLET 250315 23

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

1994 OKUMA CADET LNC8 PALLET 250315 15

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

1996 Okuma CADET LNC8

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

CNC Turing Center - Chucker -EQUIPPED WITH- OSP 5020L CNC CONTROL TURBO CHIP CONVEYOR NO TAILSTOCK (CHUCKER)

1994 OKUMA CADET LNC8 PALLET 250315 33

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

1994 OKUMA CADET LNC8 PALLET 250315 38

• Manufacturer: Okuma
• Model: CADET LNC8
• Spindle bore: 52 mm

HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

Okuma CADET LNC8 CNC Lathe

• Manufacturer: Okuma
• Model: CADET LNC8

Good condition Okuma CADET LNC8 CNC Lathes available between 1992 and 2000 years. Located in USA and other countries. Click request price for more information.