Used Sheet Metal Processing

224 Ton Reis Hydraulic 4 Post Spotting Press z23026

• Manufacturer: Reis
• Model: TUS

Serial#04.023.00 Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 106” Dayllight Opening: 118” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force ...

112 TON REIS SPOTTING PRESS Z22034A

• Manufacturer: Reis
• Model: TUS

53" STROKE 53" DAYLIGHT 60" X 48" TABLE FLIP OUT UPPER PLATTEN SLIDE OUT BOLSTER T SLOTS RAM AND BOLSTER 4 POST 1984 Estimated Weight: 28,000 lbs Approximate Overall Dimensions: 10’6” L-R x 8.6” F-B x 15’ High

120 TON PIRANHA SINGLE END PUNCH 12081B

• Manufacturer: Piranha
• Model: SEP

MODEL: SEP-120 SERIAL #: SEP120-145 120 TON PUNCH 1-1/2" HOLE THROUGH 1" MAXIMUM MATERIAL 5" MAXIMUM HOLE THROUGH 1/4" MATERIAL 2" STROKE 21.5" THROAT DEPTH 12-1/4" OPEN HEIGHT 10-1/4" CLOSED HEIGHT WITHOUT DIE...

48" x .062" Dallas Servo Feeder 18026C

• Manufacturer: DALLAS

Maximum stock width capacity: 48 inches | Thickness capacity: .020" - .062" / .125" at 18" | Pilot release: yes | Feed lengths: 0 - 999.99 | Adjustable height cabinet: Yes | Direction of feed: Right To Left F...

CWP SMX-30H #0470524

• Manufacturer: CWP

SERIAL.......................................: SMX30H100 MODEL........................................: SMX30H CAPACITIES: @ 30"........................................: .020" - .156" @ 12"..........................

LOCKFORMER Cleatformer 22gauge

• Manufacturer: Lockformer

Lock Former Cleatformer 22gauge ser#11958 220volt single phase..

LOCKFORMER 22 gauge

• Manufacturer: Lockformer
• Model: 22 GAUGE

Lock Former 22 gauge 110 volt

Lot of 120"x60" Sheet Stock and Scrap Material

Lot of 120"x60" Sheet Stock and Scrap Material

Lot of 120"x60" Sheet Stock and Scrap Material

Lot of 120"x60" Sheet Stock and Scrap Material

Lot of 120"x60" Sheet Stock and Scrap Material

Lot of 120"x60" Sheet Stock and Scrap Material

8 1/4" Diameter Vibro Pads / Isolation Mounts

• Manufacturer: N/A

These vibro pads are designed to minimize noise and vibration in various machinery applications. Constructed to provide effective dampening, they ensure that operations run smoothly by reducing the transmission o...

Flagler Sheet Gang Beader 26-900

• Manufacturer: Flagler

Call for Status and Pricing The Flanger Sheet Beader. This unit is designed for forming 5 beads on a 60” wide sheet at 12” increments per standards. A fully adjustable feed gauge. Micrometer adjustments on th...

1996 Piranha SEPP-140

• Manufacturer: Piranha
• Model: SEPP140

PIRANHA SEPP-140 single-end punch, built 1996, delivers 140 tons. Equipped with a structural die block, punch stripper, stroke control, joystick, and a hydraulic system. Specs include 20.5" throat depth and is wi...