Used Materials Testing in Wallonia, Belgium

Box with calibration plate for hardness tester UKAS CALIBRATION

With certificate Weight: 5 kg | External dimensions: 275 mm x 235 mm | Useful dimensions: 150 mm x 125 mm

1999 Automatic hardness tester REICHERTER STIEFELMEYER

Type: Briviskop BFU2, serial number: 7800010 Construction year: 1999, Weight: ± 2000 kg With multifunctional screen With automat SIEMENS-SIMATIC S5 - 100 V With ball Ø 10 mm, (HBR) Head adjustable in all directio...

1988 Hardness tester REICHERTER-AUTOMATION 3000 D

Type: BRIVISKOP 3000D, serial number: 1.609.015.049 Construction year: 1988, weight: 800 kg With HB balle Ø 5 mm, capacity 750 kg Reading on disk With adjustable ruler Height and depht adjustement by switch press...

Hardness tester WILSON ROCKWELL

• Manufacturer: Wilson Rockwell

220 V mono, 50 Hz Type: S500, model: B524R, serial number: B146309 With digital display Minor-load display Major-load display Penetration display RS232 connection Printer interface

Hardness tester for sand, portable

• Manufacturer: A.B. ALPHA

In a wooden case Old mecanic system Weight: ± 8 kg | Outside dimensions: 235 mm x 180 mm, h. 85 mm

Hardness tester REICHERTER BRIVISCOP 3000 D

Type: BRIVISCOP 3000D, serial number: 80696 Motor: Type: DN80B/4, serial number: 1208448, 0,75 kW, 1410 rpm, 220/380 V With ball Ø 5 mm Capacity 750 kg Reading on disk With adjustable ruler, pressure release by p...

Wet strength tester for clay bonded sand GF

• Manufacturer: GF

For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base

Polisher grinder STRUERS, Ø 200mm

• Manufacturer: Struers
• Model: LaboPol

Dimensions: Length: 650mm; Width: 400mm; Height: 300mm 220V, 50Hz Wet grinding possible Speed adjustable from 50-500rpm

2000 Double samples polisher STRUERS

• Manufacturer: Struers
• Model: LaboPol

Suitable for wet grinding Dimensions: Length: 700mm; Width: 690mm; Height: 220mm Ø disc 245mm; 2 discs 1 speed

Hardnesstester WOLPERT DIA TESTOR 2RC

Type : DIA TESTOR 2RC, serial no. : 3354 In good conditions With a lot of special accessories weight +- 200 kg

Sand strength tester SIMPSON

• Manufacturer: Simpson

Dimensions: Length: 250mm; Width: 450mm; Height: 320mm 110/220V, 1 phase, 50Hz, 2A Suitable for: With accessories for shear strength

Samples polishing unit 1 disc

• Manufacturer: Struers

Dimensions: length: 720mm, width: 480mm; height: 400mm Adjustable up to 1500 rpm by speed regulator

Double samples polisher STRUERS

• Manufacturer: Struers

For wet sanding Dimensions: Length: 730mm; width: 685mm; height: 200mm Ø Plate 230mm; 2 plates

Electronic scratch hardness tester GF

• Manufacturer: GF

This instrument is used to determine the scratch hardness of a mould or core. The instrument contains an eight-point cutter which, when rotated, penetrates a finished core or mould surface. The depth of penetrati...

Impact hardnesstester ERNST

• Manufacturer: Ernst

Dimensions of box: Lenght: 240mm; Width: 110mm; Hight: 60mm Hardnesstester for mobile mesurements in wooden box