Used Forging

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

17,000 lb (7,800 kg) Eumuco Electro-

• Manufacturer: SMS Eumuco

Additional info: Work resulting a blow: 10,000kgm (real 80,000kgm) Height of fall: 590mm Weight of ram hammer: 7,800kg Shut height: 330~660mm Clearance distance between guidance: 940mm Depth of ram hammer: 1,000m...

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

2,500 ton Voronezh KB8344 Heavy

• Manufacturer: Voronezh

Available for immediate inspection Very Good Condition

1970 250 ton Hatebur AMP-30 3-Die, 120ppm,

Dia: 40 mm | Tons: 250 tonnes | Builder: Hatebur | Part dia: 64 mm | Max cutoff length: 72 mm | Max die ejector: 70 mm | Min cutoff length: 19 mm | Max outer dia for combination parts: 55 mm | Max width across t...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs

300mm dia x 100mm height Mitsubishi

• Manufacturer: Mitsubishi

Additional info: Ring blank dia range: 52mm to 70mm Ring blank height: 110mm Main roll power: 37 kW Electrics: 220V/3/60 Edge roll O.D.: 29.5mm ~ 185mm Edge roll power: 37 kW Edge roll taper angle: 40º Medium rol...

2200mm dia x 450mm height Wagner RAW

• Manufacturer: Wagner

Additional info: Radial Drive motor: 300hp Axial Drive motor: 200 hp

3,500mm Ø x 1,200mm H Seonam

Additional info: Min. inside diameter(Mandrel dia.:300mm): 320mm Ring weight: Max. 12,500kgs (27,500 lbs) (Main roll) Diameter: 1300mm Height: 1400mm Rolling speed: Max. 1.5m/sec (Mandrel) Diameter: 300mm Horizon...

45mm diameter Smeral UL 45A Cylindrical type

• Manufacturer: Šmeral Brno
• Model: UL 45

Moved to storage Immediately available Exceptional Condition

1970 1200 ton Hatebur model AMP 70 Hi-Speed

Available for immediate inspection and delivery Dia: 60 mm | Tons: 1,200 tonnes | Builder: Hatebur | Part dia: 125 mm | Max cutoff length: 140 mm | Max die ejector: 130 mm | Part wt: 6 kgs | Min cutoff length: 45...

2006 80mm dia Jaewoo JCP-450

• Manufacturer: Jaewoo

Additional info: Minimum cutting diameter: 28mm Max cutting length: 450mm Minimum cutting length: 50mm Feeding motor power: 2.2 kW Very good working condition Available for immediate inspection and delivery Still...

2015 5/8" x 5" National HS LS-DSSD Warm Header

Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...