Used Forging Presses

1980 1″ NEDSCHROEF 4-DIE model BV6 High Speed Boltmaker (REBUILT 2017)

• Manufacturer: Nedschroef

1″ NEDSCHROEF 4-DIE model BV6 High Speed Boltmaker (Rebuilt by Nedschroef 2017) SPECIFICATIONS: FEATURES: * TIMED KNOCKOUTS IN ALL STATIONS * IFO TRANSFER * THREADING STATION * SOUND ENCLOSURE

1951 5,000 ton Lake Erie Push Down type

• Manufacturer: Erie Press Systems
• Capacity: 4,535,900 kilogram
• Stroke length: 1.219 millimeter

Additional info: Equipped With: Rubber Pad Fluid Forming Unit Top Mounted Hydraulic Power Unit Including: (1) 60 HP Oilgear Hydraulic Pump #DX-6011 - 880 RPM - 1100 Rated Pressure (1) 150 HP Oilgear Hydraulic Pum...

Nedschroef Model NH416 4 Die Progressive Header

• Manufacturer: Nedschroef

Maximum bolt diameter: 16mm | Maximum bolt length: 140mm | Maximum cutoff length: 170mm | Die diameter (maximum): 90mm | Die length: 165mm | Kickout length pko: 38mm | Forging load: 1500 KN | Maximum cutoff diam...

1942 ACME HILL XN

• Manufacturer: Acme
• Model: XN

Die depth: 22" | Die width: 14" | Die length: 19-1/4" | Die opening: 5" | Tool holder pocket width: 5" | Stock gather: 7-5/8" | Hold: 2" | Stroke: 12" | Header slide length: 80" | Hp: 30 | Forging pressure: 630 ...

2006 JERN YAO JNFP 14B5S

• Manufacturer: JERN YAO

Max. cut-off dia.: 14 millimeters | Max. cut-off length: 13 millimeters | Maximum kickout: 15mm | Maximum pko stroke: 8mm | Maximum production: 280 PPM | Electrics: 30 HP ACVD Motor and Controls | Approx. weigh...

1972 ASAHI OKUMA ORH 120

• Manufacturer: Okuma

Maximum cutoff length of wire: 130mm ( 4" ) | Maximum kickout length 1st die: 130mm ( 5" ) | Maximum kickout length 2nd die: 90mm ( 3-9/16" ) | Die hole diameter 1st die: 65mm ( 2% ) | Die hole diameter 2nd ...

2,000 ton Hasenclever model SPK

• Manufacturer: Hasenclever

Still installed and under power Exceptionally fine condition

1980 4000 Metric Tonne National “MAXI” Type

Design Features and equipment: • Heavy Duty patented Multi-Plate Air Clutch • Heavy Duty Air Operated Disc Brake • Automatic pressure oil lubrication • Cast steel bedframe • (4) Tie-Rod construction • 2-Point Low...

6,300kg Weingarten PSH4.560f, max stroke 23.6",

• Manufacturer: Weingarten

Nom force: 5,300 tonnes | Max force: 6,300 tonnes | Builder: Weingarten | Screw dia: 560 mm | Stroke: 600 mm | Spm: 35 | Table l-to-r: 1,300 mm | Table f-to-b: 1,400 mm | Distance between the uprights: 1,500 mm ...

2013 750 ton J&H Model JFP-750L, 300mm stroke,

Forge tons: 750 tonnes | Manufacturer/model: J&H JFP-750L | Stroke: 300 mm | Spm: 85 | Bed lr: 850 mm | Bed fb: 900 mm | Ram face l-to-r: 740 mm | Ram face f-to-b: 780 mm | Upper knockout stroke: 20 mm | Lower k...

1987 3,300-ton Skoda CKV 3300 4-Column 3-Cylinder Push Down Open Die w/ 40-ton Zdas Rail Bound Manipulator Re: 25760

• Manufacturer: Skoda
• Model: CKV3300

Additional information: 3,300 ton Skoda CKV 3300 Press specs: Year of manufacture: 1987 / modernization 2006 Nominal force : 3,300 metric tons 3-Stage Forging Force capacity as follows: 1st stage: 1,100 Tonnes ...

1970 2,000 ton National Maxipres with Air

Still installed and under power for inspection Very good working condition

1,300 ton National Maxipres

Still installed and under power for inspection Available for immediate inspection and delivery

1991 2,000 ton (Marked 2,500 ton) Eumuco, 300mm stroke,

• Manufacturer: SMS Eumuco

Forge tons: 2,500 tonnes | Manufacturer/model: Eumuco | Stroke: 300 mm | Spm: 60 | Bed lr: 920 mm | Bed fb: 1,700 mm

1980 4,000 ton China Built BackShaft type

Still installed and under power for inspection Very good working condition