Used Electrical Test Instruments in Dublin, Ireland

Schaffner NSG 224A
- used
- Manufacturer: Teseq - Schaffner
Details The Schaffner NSG 224A is used in the NSG 200 System to simulate the kind of interference frequently met in connection with mechanical Switching of inductive motors. All our used & refurbished equ...
Dublin, Ireland
Teseq (Schaffner) NSG 437
- used
- Manufacturer: Teseq - Schaffner
Details Air- and contact-discharge up to 30 kV Light version featuring uncompromised test performance Compliant with a wide range of standards (IEC, ANSI, SAE, ISO) Touch panel display controls Easily and quickly...
Dublin, Ireland
SyntheSys Research BSA17500CSI
- used
- Manufacturer: SyntheSys Research
Details SyntheSys Research BSA17500CSi The SyntheSys Research BERTScope 17500CSi advanced the BERTScope Family to 17.5 Gb/s and covers today’s serial data interfaces from 1Gb Ethernet (GbE) to 10 GbE and are desi...
Dublin, Ireland
Haefely IP4A
- used
- Manufacturer: Haefely
Details The Haefely IP4A Capacitive Coupling Clamp is a capacitive coupling clamp for superposition of bursts on data lines in accordance with IEC/EN 61000-4-4. Features include: maximum cable size 40mm minimum t...
Dublin, Ireland
Marconi IFR Aeroflex 500A
- used
- Manufacturer: Aeroflex
Details The Marconi IFR Aeroflex 500A Communications Service Monitor integrates FM and AM signal generators with a sensitive 2 mV receiver, enabling AM, FM, and SSB testing. It includes a 0.2 ppm TCXO for precisi...
Dublin, Ireland
Schaffner NSG432
- used
- Manufacturer: Teseq - Schaffner
Details Discharge voltage V0: 2 - 25kV Polarity: positive/negative (depending on discharge network) Discharge capacitor Cs: 150 pF ? 10% Discharge resistor Rd: 330 ohms ? 10% Operating modes: single/repetitiv...
Dublin, Ireland
Rohde & Schwarz ESVS10
- used
- Manufacturer: Rohde & Schwarz
- Model: ESVS10
Details The Rohde & Schwarz ESVS10 EMI Test Receiver supports compliance with CISPR16-1, VDE0876, and ANSIC63.2 standards, covering a level measurement range from -14 dBmV to +137 dBµV. With a frequency resolutio...
Dublin, Ireland
Noiseken FNS-AXII-A16
- used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AXII-A16 is a precision 1-phase Fast Transient/Burst Immunity Test Generator designed for compliance testing to IEC61000-4-4 standards. It delivers accurate and repeatable burst pulses wi...
Dublin, Ireland
Teseq LE4070
- used
- Manufacturer: Teseq - Schaffner
Details The Teseq LE4070 RF Cable Set For NSG 4070 is designed for seamless compatibility with the NSG 4070 system, delivering reliable RF signal transmission with minimal loss. Built from high-quality materials,...
Dublin, Ireland
Schloder SESD200
- used
Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...
Dublin, Ireland
Noiseken FNS-AXII-B50
- used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AXII-B50 3 Phase Fast Transient / Burst Immunity Test Generator offers precise testing with up to 4,500V output adjustable in 10V steps, meeting IEC 1000-4-4 standards. It supports Contin...
Dublin, Ireland
Schloder SESD230
- used
Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...
Dublin, Ireland
Rohde & Schwarz ESW8
- used
- Manufacturer: Rohde & Schwarz
- Model: ESW8
Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...
Dublin, Ireland
Rohde & Schwarz ESU26
- used
- Manufacturer: Rohde & Schwarz
- Model: ESU26
Details The Rohde & Schwarz ESU26 is a high-performance EMI test receiver and spectrum analyzer covering 20Hz to 26.5GHz. It is CISPR 16-compliant and meets all commercial and military standards for electromagnet...
Dublin, Ireland
Rohde & Schwarz ESPC
- used
- Manufacturer: Rohde & Schwarz
- Model: ESPC
Details The Rohde & Schwarz ESPC EMI Precertification Test Receiver offers a wide frequency range from 150 kHz to 1000 MHz, supporting all major EMI standards including CISPR, EN, FCC, and VDE. It features parall...
Dublin, Ireland