Used Veneer Machines

Northtech NT VeneerPlus G1 Longitudinal Veneer Splicers

The VeneerPlus accurately and firmly bonds veneer edges with no visible joint line. The NT VeneerPlus G1 Longitudinal Veneer Splicer is equipped with an integrated gluing system inside. It’s particularly suitable...

Fisher & Ruckle Impetum 1200 Longitudinal Veneer Splicer (2021) Stock #2835

• Manufacturer: Fisher & Ruckle

Fisher & Ruckle Model Impetum 1200 Longitudinal Veneer Splicer Veneer Specifications: 3mm Thickness Capacity Foot Pedal Remote Integrated Glue Pot Chilling Unit Memory Recall Control System. Wired for 400 V 3ph B...

Northtech NT UltiMate 2800 Series Crossfeed Veneer Splicer

The NT UltiMate 2800 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT UltiMate 1500 Series Crossfeed Veneer Splicer

The NT UltiMate 1500 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT CutMate 700C Cross-Cut Veneer Clipper

The NT CutMate 700C cross-cut veneer clipper is used for cutting veneer across its grain. All INNOVATOR guillotines are expertly manufactured with European quality and safety standards thanks to a partnership wit...

SAVI TFK-700 Cross Cut Veneer Clipper

• Manufacturer: Savi

This is a hard to find machine and they haven’t changed all that much over the years. 700mm/27.5″ capacity. Hydraulic movement of blade with dual palms for safety. 3kW(4 HP), 220-240/440-480V/3-phase pump motor. ...

Northtech GlueEasy 3000C Veneer Edge Trimming & Glue Applicator

The GlueEasy C-Series machines are manufactured to provide precise and reliable 90° glued veneer edges on thick veneers. Unlike traditional hand-gluing methods, the veneer pack is placed vertically and clamped ti...

Northtech NT UltiMate 3400 Series Crossfeed Veneer Splicer

The NT UltiMate 3400 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

RFS Protech PT7 Veneer Former

• Manufacturer: Pro-Tech

The RFS Protech PT7 Radius Former uses a series of machined rails supporting dual sets of heavy aluminum arms, which are adjusted to define the pattern to be fabricated. The Veneer Slats are clamped to the form a...

Fischer & Ruckle Omnimaster Plus Veneer Splicer

• Manufacturer: Fischer

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm F...

Fisher + Ruckle Veneer Longitudinal Splicer FZK

• Manufacturer: Fisher + Ruckle

Fisher + Ruckle Veneer Longitudinal Splicer FZK Good Condition Runs Well

Fisher+Ruckle FZR-15 Crossfeed Splicing Machine Stock #10368

• Manufacturer: Fisher+Ruckle

Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Producti...

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE

• Manufacturer: FISHER RUCKLE

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE Manufacturer: M+S Brugg AG Model: EM-34 Mfg Date: 2006 Power: 400v, 60hz, 3ph CSA Hours: 12,693 Machine Type: Veneer splicing machine (crossfeed) Splicing T...