Used Sanders in Wallonia, Belgium

Router modified into sander

Router modified into sander Disassembly and disconnection at the expense of the buyer. Access to a 90 cm high loading dock for loading from the rear of the vehicle. Recommended visit]]>

Danckaert Endless Belt Sander

• Manufacturer: Danckaert

Endless belt sander Tested = was started without further ado Engine pad not accessible, voltage to be checked by the buyer Disassembly and disconnection at the expense of the buyer. Access to a 90 cm high loading...

[Internal ref: S0864] ZEISS-APTON 1RA300 sander

• Manufacturer: Zeiss

Sander Type: 1RA300, Serial No.: 14057 SACHSENWERK engine, type: AD2-5/4, serial number: 362854, 1.2 kW, 220/380 V, 1410 rpm Ø lapidary disc 395mm, sandpaper cylinder Ø 110mm, length 150mm With 2x suction hood Su...

Vanden Abelle marquetry scroll saw converted into a sander

• Manufacturer: Vanden Abelle

Marquetry scroll saw converted into a sander Disassembly and disconnection at the expense of the buyer. Access to a 90 cm high loading dock for loading from the rear of the vehicle. Recommended visit]]>

[Internal ref: S1662] HERZOG 1-disc sander, dry sanding.

• Manufacturer: Herzog

1-disc sander Year 1973 Sander with 1 horizontal disc With suction]]>

[Internal ref: S2193] Dry 2-disc sander, HERZOG HT350-2

• Manufacturer: Herzog

2-disc dry sander Type HT350-2, Year 1980 With built-in dust filter

1995 Viet Target-321/B

• Manufacturer: Viet
• Model: Target 321

3-Belt Sander Sanding tape balance (basement hardware; +/- 20 strips Tested = was started without further ado Disassembly and disconnection at the expense of the buyer Exit possible on the ground floor or via loa...

Wemhoner lapidary sander

• Manufacturer: Wemhöner

2 Work areas Work lights Electrical box 3.7kw motor Voltage 380V

2006 REHNEN SK-1

• Manufacturer: Rehnen
• Model: SK-1

Pneumatic oscillation Sanding both sides Centralized vacuum 4 kW motor Voltage: 380V

VIET MINI300

• Manufacturer: Viet

Upper sander 2 bands Width 300mm Brush coming out of the machine Minimum height 2mm Maximum height 138mm Electric rise and fall Digital display of the passage height Belt with electronic advance variator ...

2020 CASADEI LIBRA35

• Manufacturer: Casadei

Working width 1100mm Band width 1115mm Development of 1900mm bands Working height min max 4/170mm Steel inlet roller - rubber roller - steel outlet roller Finishing skate Panel thickness sensor Main engine...

2002 KUNDIG TOPIQ 2

• Manufacturer: Kundig

Width 1100mm 2 bands 1 skate 1 rubber roller 2 steel rollers 11kw motor Digital display Electric rise and fall Electronic conveyor belt advancement variator 380V

HEMPEL P9

• Manufacturer: Hempel
• Model: P9

Sander for round parts Maximum length 900mm Maximum diameter 100mm in automatic cycle Diameter 150mm in manual cycle Sandpaper Coconut brushes 380V

2008 CM3 LEV-800

• Manufacturer: CM3

Orbital belt sander Carousel system for sanding the ends of parts 380V