Used Coil Handling in Indiana, USA

FJ Littell Machine Coil Stock Uncoiler 4000lbs Power Feed Decoiler 230/460V

• Manufacturer: Littell

Used, in Good Working Condition. Removed From a Working Environment. Wired for 460VAC 3Ph with automatic brake. Min coil bore size is 16" Max is 20". Max width of clamping is 18". No 25 Reel. If this item ships a...

Dallas Industries R40X18 Coil Stock Uncoiler 4000lbs 16-20" ID 18" W Decoiler

• Manufacturer: Dallas Industries

Used, in Good Working Condition. Removed From a Working Environment. Has a friction brake. Min coil bore size is 16" Max is 20". Max width of clamping is 18". If this item ships as Flat Rate Freight please see de...

Regal 3000-12SRNP Coil Stock Uncoiler 3000lbs 12" ID 24" W No Motor Decoiler

• Manufacturer: Regal

Used, in Good Working Condition. Removed From a Working Environment. This unit is missing a motor or drive unit. For a size 50 chain. Min coil bore size is 12" Max is 20". Max width of clamping is 26". If this it...

Dallas Industries 06090 Coil Stock Uncoiler 2500lbs 16-20" ID 12" W Decoiler

• Manufacturer: Dallas Industries

Used, in Good Working Condition. Removed From a Working Environment. Has an 120VAC electric brake. Min coil bore size is 16" Max is 20". Max width of clamping is 12". If this item ships as Flat Rate Freight pleas...

Jaco Coil Reel Uncoiler Feeder Manual Brake 20" ID Manual Tightener Decoiler

• Manufacturer: Jaco

Used, in Good Working Condition. Removed From a Working Environment. This is a simple uncoiler. Manual brake and tightener. 20" mandrel arms. 20" max ID of the coils. If this item ships as Flat Rate Freight pleas...

American Steel Line 1000 Coil Stock Uncoiler 6000lbs 16-20"ID 22"W Decoiler

• Manufacturer: American Steel Line
• Model: 1000

Used, in Good Working Condition. Removed From a Working Environment. Has an automatic friction type brake. Min coil bore size is 16" Max is 20". Max width of clamping is 22". Non Motorized. If this item ships as ...

FJ Littell Machine No 20-18 Coil Stock Uncoiler 2000lbs 16-20" ID 18" W Decoiler

• Manufacturer: Littell

Used, in Good Working Condition. Removed From a Working Environment. Has an electric brake that is not hooked up, see photos. Min coil bore size is 16" Max is 20". Max width of clamping is 18". If this item ships...

FJ Littell Machine No 40-18 Coil Stock Uncoiler 4000lbs 16-22" ID 18" W Decoiler

• Manufacturer: Littell

Used, in Good Working Condition. Removed From a Working Environment. Has an electric brake that is not hooked up, and a modified brass bar mechanical brake that is in use. Min coil bore size is 16" Max is 22". Ma...

FJ Littell Machine 25-12 Coil Stock Uncoiler 2500lbs 20"ID 12"W Decoiler W/Brake

• Manufacturer: Littell
• Model: 25-12

Used, in Good Working Condition. Removed From a Working Environment. Has a 120VAC electric brake. Min coil bore size is 15" Max is 20". Max width of clamping is 12". If this item ships as Flat Rate Freight please...

Regal 6000-18-DRNP Double End Uncoiler Decoiler 6000lb Power Feed 230/460V 3Ph

• Manufacturer: Regal

Used, in Good Working Condition, Tested. Manual mandrel tightener. Looks to be for a 15-20" id coil size. 18" width from factory. Could be up to 26" with no wing support. Rated for 6000 lbs. Drive motors were add...

1" Steel Top Turn Table Work Bench Uncoiler 72" Top 2Hp 230/460V Motor

Used. 2 Bolts are missing on the top. Rotates 28 per minute. This is wired for 460V 1" thick top. 60" top. Height is 14" 2Hp 230/460V 3Ph This was used as a metal uncoiler. I would imagine this is very heavy duty...

1" Steel Top Turn Table Work Bench Uncoiler 60" Top 1Hp 90V DC Motor

Used. Rotates 28 per minute. This is at 90V 1" top. This has been painted may not ground the best for welding. 60" top. Height is 12" 1 hp motor DC 90V Dodge speed reducer gearbox. This was used as a metal uncoil...

1" Steel Top Turn Table Work Bench Uncoiler 72" Top 2Hp 180V DC Motor

Used. Rotates 25 per minute. This is at 180V 1" thick top. 60" top. Height is 15" 2 hp motor DC 180V Dodge speed reducer gearbox. This was used as a metal uncoiler. I would imagine this is very heavy duty. If thi...