Used Agitators, Blenders, Mixers in Germany

Agitator tank 10 cbm, double jacket

• Manufacturer: Sielmann

Operating data: 3 bar operating pressure, 150 °C operating temperature, with TÜV papers. Design: cylindrical, suspended on 4 claws with dished ends, upper end flanged, inclined blade agitator from above, centered...

VEB - M 910 EX 25019 agitator

• Manufacturer: VEB

Compulsory mixer, agitator, mixing tool, stirrer Call recording: 160 watts | Connection: 380 volt | Dimensions: 700/200 / H190 mm | Mass: 14 | Internal storage: 2A40702

Agitator from Würth - RW 1400-E 8177

• Manufacturer: Würth

Compulsory mixer, agitator, mixing tool, stirrer Call recording: 1400 watts | Connection: 230 volts | Number of revolutions: 150-470 rpm | Dimensions: 920/450 / H220 mm | Mass: 10 | Internal storage: 240004

Agitator from Eibenstock - EHR 23 / 2S 8178

• Manufacturer: Eibenstock

Compulsory mixer, agitator, mixing tool, stirrer Call recording: 1400 watts | Connection: 230 volts | Number of revolutions: 0-510 rpm | Dimensions: 600/500 / H180 mm | Mass: 15 | Internal storage: 240004

20000 liter agitator tank, Aisi 304 with blades agitator

• Manufacturer: Alfa-Laval

remarks: Smaller dents in the upper bottom; in addition, former connections were welded or sheet metal welded into the upper bottom; former outlet fitting is no longer available; Suspension of the manhole cover i...

420 Liter agitator tank, Aisi 304 with propeller agitator

remarks: 2 sight glasses in the cylinder no longer present; feet made of Fe, painted (with reinforcements made of st. st.); A pipe with a diameter of approx. 25 mm runs off the outlet pipe (see photos) agitator f...

450 liter agitator tank, Aisi 304 with agitator disc

agitator features: Motor-/gear unit with signs of corrosion; 1 hole in the fan cover (see photos)

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

1200 liter agitator tank, Aisi 316 with propeller agitator

remarks: 3-legged frame made of Fe (lacquered); support ring of the cover made of Fe; 1 circular opening in the lid (see photos)

820 liter agitator tank, Aisi 304 with propeller agitator

Volume: 820 liter | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 890 mm | Cylindrical height: 1.200 mm | Total height: 1.800 mm | Manhole: in the upper bottom | Outlet: 32 mm | Notice: some resid...

16.000 liter agitator tank, AISI 304 with blades agitator

notice: some residues of previous content, bump at the cylinder

3250 liter agitator tank, Aisi 316 with blades agitator

notice: some residues of previous content, pipe end cut flush remarks: Sheet metal cutouts in the lid; outlet probably diameter 80 mm

10000 liter horizontal agitator tank; Aisi304 with propeller agitator

Volume: 10.000 liter | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Diameter inside: 2.000 mm | Diameter outside: 2.100 mm | Cylindrical length: 32...

1340 liter agitator tank, Aisi 304 with cup agitator

• Manufacturer: Rieger

max. allowable working temperature: 85 °C Volume: 1.340 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Diameter inside: 1.290 mm | Cylindrical height: 870 mm | Total height: 2.180 mm | Year...

6000 liter agitator tank, Aisi 304 with propeller agitator

remarks: Manhole diameter approx. 410 mm; adhesions and slight metallic discolouration inside the tanks EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into considera...